Radial shaft seal DBH 9656Vit — 85.00 x 105.00 x 6.80/11.00

DBH 9656Vit is a radial shaft seal reference, within Seals. Request a quote for 9656Vit via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9656Vit radial shaft seal is a lip seal designed for rotating shafts. Its function is to retain lubricant inside the housing and prevent the entry of contaminants, particles and moisture. With dimensions of 85 mm shaft, 105 mm housing and a height of 6.80/11.00 mm, and a design A 275-R, it is a replacement part for industrial equipment where reliable sealing is required under continuous rotation conditions.

This item is a radial shaft seal from the DBH brand, identified with the code 9656Vit. Its dimensions are 85 mm shaft diameter, 105 mm housing diameter and a height of 6.80/11.00 mm. The design A 275-R corresponds to a configuration with a sealing lip and reinforced body. These dimensions and characteristics are those listed in the technical data sheet and allow the seal to be selected for a specific assembly.

Radial shaft seals such as the DBH 9656Vit are used in gearboxes, pumps, electric motors, transmission shafts and process equipment. Their typical application is on rotating shafts where oil or grease needs to be contained and bearings and gears protected from dust, water or chips. They are also used in agricultural machinery, material handling equipment and power transmission systems.

To correctly install this seal, verify that the shaft and housing are clean, free of burrs and marks. Lubricate the lip with the same oil or grease used in the equipment before inserting it. The seal must enter perpendicular to the shaft, without direct blows on the lip. If the housing has a chamfer, make sure the seal seats fully. The selection depends on rotation speed, temperature and the type of fluid to be retained.

If you need a seal with equivalent dimensions or a nearby size, you can consult us. We have alternatives from other brands and series to adapt to your equipment. To do so, send us the code 9656Vit or the dimensions of the original seal (shaft diameter, housing and height) and we will quote the available option. We can also advise you if the design A 275-R is not suitable for your application.

At MR Accesorios Industriales we carry the DBH brand as part of our line of seals and oil seals. If this seal is for your maintenance, write to us on WhatsApp with the code 9656Vit and we will send you the quote. We also handle inquiries for special dimensions or orders for other sealing parts.