Radial shaft seal DBH 9654Vit — 64.00 x 88.00 x 6.00

DBH 9654Vit is a radial shaft seal reference, within Seals. Request a quote for 9654Vit via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9654Vit radial shaft seal is a lip seal that mounts on a 64 mm shaft and seats in an 88 mm bore, with a total height of 6 mm. Its function is to retain lubricant inside the assembly and prevent dust, water or particles from entering and damaging bearings and bushings. It is a wear part that is replaced during scheduled maintenance or when a visible oil leak appears around the seal area.

This item is identified by the designation 9654Vit and belongs to the DBH brand radial seals and oil seals category. Its dimensions are 64 mm shaft, 88 mm housing and 6.00 mm height. The indicated design is A 156-R-H, which defines the geometry of the lip and the metal body. Before mounting, verify that these three dimensions match the housing and shaft of your equipment, because a seal with a different height may not seat correctly.

Radial shaft seals of this type are used in gearboxes, pumps, electric motors, rollers and transmission equipment where a shaft rotates inside a fixed housing. In the food, chemical or process industries, the selection of the lip and spring material depends on the fluid and the working temperature. If the seal is exposed to solvents or to high-pressure water cleaning, it is advisable to evaluate a variant with a lip made of a specific material.

For mounting, clean the housing and the shaft, check that there are no burrs or marks that could cut the lip, and lubricate the seal with the same grease or oil used in the equipment. The seal must enter perpendicular to the shaft, without direct blows on the lip. If the shaft shows wear on the sealing track, one option is to mount the seal slightly offset or use a wear sleeve. Eccentricity and bearing play also affect the service life of the seal.

If you cannot find the code 9654Vit or you need a nearby size, send us the shaft, housing and height dimensions along with a photo of the old seal. With that data we can look for an equivalent in the same brand or in another line we carry. We can also advise you if the A 156-R-H design is not available and an alternative with the same section needs to be evaluated.

MR Accesorios Industriales carries the DBH brand and has more than 80 years of experience in the industry. To request a quote for this seal or ask about a similar size, write to us on WhatsApp with the code 9654Vit and the dimensions of your equipment. That way we can offer you the option that best suits your application.