Radial shaft seal DBH 9598 — 29.50 x 42.00 x 5.00

DBH 9598 is a radial shaft seal reference, within Seals. Request a quote for 9598 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9598 radial shaft seal is a lip seal fitted into a machine housing to retain lubricant and prevent the entry of contaminants. Its dimensions of 29.50 mm shaft, 42.00 mm housing and 5.00 mm height, with Lx design, make it suitable for rotating shafts in industrial equipment. MR Accesorios Industriales carries this official brand and advises you so you choose the right seal for your application.

The DBH 9598 is a radial-type seal with a sealing lip, identified by its designation 9598. According to the product page data, it has a shaft diameter (d) of 29.5 mm, a housing diameter (D) of 42 mm and a height (h) of 5.00 mm. The Lx design corresponds to a configuration with a rubber lip and spring, intended for rotating shafts with lubrication. These dimensions are the ones you need to verify before replacing an existing seal.

Typical applications for this seal include gearboxes, pumps, electric motors, rollers and transmission equipment where oil or grease must be contained at the point where the shaft passes through the housing. Because of its compact size, it is used in low and medium power assemblies. It also appears in machine tools, process equipment and conveying systems that operate with 29.5 mm shafts and 42 mm housings.

To install the seal correctly, check that the shaft has no burrs or wear and that the housing is clean and undamaged. Lubricate the lip before inserting it and fit the seal perpendicular to the shaft, without striking it directly. If the shaft shows a worn track, consider a nearby size or a seal with an offset lip. The selection depends on speed, temperature and the type of lubricant, data that should be confirmed with the manufacturer.

If you cannot find the exact size or need an equivalent, send us the code 9598 and the dimensions of your old seal: shaft diameter, housing diameter and height. With that data we can search for an alternative within the same series or suggest a nearby size. We can also advise you on the most suitable lip design for your equipment. Write to us on WhatsApp and we will reply with the available option.

MR Accesorios Industriales carries the DBH brand as part of its seals and oil seals line. If you want a quote for the 9598 seal or to ask about another size, send the code via WhatsApp and we will provide the information you need for your equipment.