Radial shaft seal DBH 9595 — 40.00 x 80.00 x 8.00

DBH 9595 is a radial shaft seal reference, within Seals. Request a quote for 9595 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9595 radial shaft seal is a lip seal designed for rotating shafts. Its function is to retain lubricant inside the housing and prevent the entry of dust, water or contaminating particles. With dimensions of 40 mm shaft diameter, 80 mm housing and 8 mm height, it is press-fitted into covers, gearboxes or pumps. It is a wear part that should be replaced at the slightest sign of leakage or hardening of the elastomer.

This DBH 9595 seal has an Lt design and standard dimensions: shaft diameter 40 mm, housing diameter 80 mm and height 8.00 mm. The sealing lip works on the rotating shaft, while the outer diameter is press-fitted into the housing. Designation 9595 corresponds to the DBH series of radial shaft seals for general use. Always verify these three dimensions before ordering a replacement, because even a minimal difference prevents installation or causes leaks.

It is used in equipment with shafts that rotate inside a fixed housing: gearboxes, centrifugal pumps, electric motors, conveyor rollers and machine tools. It also appears in applications where there is contact with oil or grease and the lubricant must be contained. In food or process plants, the selection of the elastomer depends on the fluid and the working temperature. In each case, the seal dimensions are decisive: if the shaft is worn, a seal with an offset lip or a repair sleeve is sometimes used.

To install a radial shaft seal, clean the housing and the shaft, verify that there are no burrs or deep marks, and lubricate the lip with the same grease or oil used in the equipment. Insert the seal perpendicular, without striking the lip, using a tube or spacer that presses on the outer ring. If the housing has a shoulder, respect the seating depth. Peripheral speed, temperature and fluid pressure determine the service life; therefore, under severe conditions, consult us to evaluate an alternative design.

If you need a seal equivalent to the DBH 9595 or a nearby size, send us the complete part number, the shaft, housing and height dimensions, and a photo or sample of the old seal. The housing drawing also works. With that data we look for the available option in our line of seals and oil seals. Not all standard sizes are manufactured in all designs, so prior verification avoids mistakes.

MR Accesorios Industriales supplies the DBH brand as part of its line of seals and oil seals. If you have doubts about the application or installation, send part number 9595 on WhatsApp and we will advise you. We can also quote the quantity you need and arrange delivery in Buenos Aires or shipping to the interior.