Radial shaft seal DBH 9591 — 62.00 x 100.00 x 12.00

DBH 9591 is a radial shaft seal reference, within Seals. Request a quote for 9591 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9591 oil seal is a radial seal with 62 mm shaft diameter, 100 mm housing and 12 mm height, design Kz. It is used to retain lubricant and exclude contaminants in rotating equipment, with the lip resting on the shaft and the body mounted in the housing. It is a wear part: when oil loss or dust ingress appears, it should be replaced. MR Accesorios Industriales supplies this official brand and advises you on choosing the correct size.

This item is a DBH 9591 radial shaft seal, identified by its designation 9591. Its dimensions are 62 mm shaft diameter, 100 mm housing diameter and 12.00 mm height. Design Kz defines the geometry of the lip and the body. It is a single-lip seal, intended for rotating shafts, that combines a sealing track against the shaft and an outer diameter that fits into the housing. It is manufactured with elastomers resistant to oils and greases, and its function is twofold: retain the lubricant and slow the ingress of dirt.

Typical applications for a seal of these dimensions appear in gearboxes, pumps, electric motors, rollers and power transmission equipment. In general, it is mounted at the end of a shaft that passes through a housing, where the oil must be separated from the environment. It is also used in agricultural machinery, conveyors and process equipment. If the seal works at elevated temperature, high peripheral speed or exposure to dust, it is advisable to verify the lip material and the type of elastomer before replacing it.

To install a seal, check the condition of the shaft: no burrs, no wear and with adequate roughness. The lip is lubricated before insertion and is seated with a tool that does not damage it. The shaft, housing and height dimensions must match those of the original seal; if the shaft has a marked groove, a different height or a wear sleeve is sometimes chosen. Speed, pressure and the fluid to be retained also influence the selection. When in doubt, consult the manufacturer's data sheet.

If you need an equivalent or a nearby size, send code 9591 or DBH-9591 by WhatsApp to MR Accesorios Industriales. It also helps to send the shaft, housing and height dimensions, the type of fluid and a photo of the old seal. With that data, an alternative is sought within the same brand or another line that MR supplies. If the item is not in the catalog, the manufacturer is consulted and a quote is provided.

MR Accesorios Industriales has more than 80 years in the sector and supplies this official brand. To request a quote for the DBH 9591 seal, write to us by WhatsApp with the code and dimensions. This confirms the variant and avoids installation errors.