Radial shaft seal DBH 9501Pol — 25.00 x 35.00 x 6.00

DBH 9501Pol is a radial shaft seal reference, within Seals. Request a quote for 9501Pol via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9501Pol radial shaft seal is a lip seal mounted on the shaft that closes against the housing to retain lubricant and stop the entry of dust, water or particles. With a 25 mm shaft, 35 mm housing bore and 6 mm height, it is a compact size widely used in power transmission equipment and small pumps. MR Accesorios Industriales sells it as part of its line of seals and oil seals for industrial maintenance.

This item is a DBH 9501Pol radial shaft seal, identified by its designation 9501Pol. Its dimensions are 25.00 mm shaft diameter (d), 35.00 mm housing bore diameter (D) and 6.00 mm height (h). The Lx-R-H design indicates the lip and body configuration: a single-lip seal with spring, designed for lubricated rotating shafts. It is a direct replacement part: it is replaced by another with the same designation or by an equivalent that respects those three dimensions.

Typical applications for a seal of this size appear in small gearboxes, electric motors, low-power centrifugal pumps, compressors and belt- or chain-driven transmission equipment. It is also used in machine tools, mixers and conveyors where oil or grease must be contained on a rotating shaft. In all cases, the seal runs on a machined shaft and a finely finished housing, and its function is to separate two environments: the lubricated one and the outside.

To install it properly, verify that the shaft has no burrs or wear marks on the sealing surface and that the housing is clean and free of dents. Lubricate the lip before inserting it and place the seal with a tube or press that presses evenly on the body, never on the lip. If the shaft has a deep groove, consider a nearby size or a seal with an offset lip. Selection depends on speed, temperature and the type of lubricant, data that should be confirmed with the manufacturer.

If you need an equivalent or a nearby size, send us the code 9501Pol, the equipment brand and the shaft and housing dimensions. With that data we look for alternatives in the same category of seals and oil seals, respecting the dimensions and the lip type. MR Accesorios Industriales works with official brands it sells and with in-house manufacturing in other lines.

To request a quote for the DBH 9501Pol seal, write to us on WhatsApp with the code and the quantity you need. If you have doubts about the size, send a photo of the old seal or the dimensions taken with a caliper. That way we confirm the correct designation and avoid unnecessary changes.