DBH 9500Pol radial shaft seal — 17 x 28 x 7

DBH 9500Pol is a reference of radial shaft seal, within Seals. Request a quote for 9500Pol via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 9500Pol radial shaft seal is a lip seal designed for rotating shafts with a 17 mm diameter, a 28 mm housing and a 7 mm height. Its function is to retain lubricant inside the assembly and prevent dust, water or particles from entering and accelerating wear on bearings and bushings. It is press-fitted into the housing and runs on the shaft surface, with a flexible lip that compensates for minor misalignment. It is a common replacement part in industrial and agricultural equipment.

This item is a radial shaft seal of Lx-R-H design, with shaft (d) 17 mm, housing (D) 28 mm and height (h) 7.00 mm. The code 9500Pol identifies the size and the construction type within the DBH line. The Lx-R-H design corresponds to a seal with a sealing lip, a reinforced body and a retaining spring, intended for rotating shafts with permanent lubrication. The combination of dimensions allows original seals to be replaced in gearboxes, pumps and compact motors.

Typical applications for a 17 x 28 x 7 mm oil seal include small gearboxes, centrifugal pumps, electric motors, drive shafts and tillage equipment. In all cases, the seal separates the oil or grease from the outside environment and protects nearby bearings. It is also used in machine tools and process equipment where lubricant must be contained without leaks and contamination of the oil sump must be avoided.

To select correctly, check that the shaft diameter is within the recommended tolerance and that the housing has no burrs or scratches. The seal must go in perpendicular and under uniform pressure, without striking the lip. Before mounting, lubricate the lip with the same oil used in the equipment and make sure the spring is on the side of the fluid to be retained. If the shaft is worn, consider a seal with an additional lip.

To quote the code 9500Pol together with the shaft, housing and height dimensions, or a photo of the part, send us. At MR Accesorios Industriales we cross-check the designation against the manufacturer's data sheet to confirm the exact size. We can also advise you on the lip type and elastomer material according to the fluid and working temperature.

DBH is a brand MR sells, so you can ask us about any code in its oil seal line. To move forward with the quote, send the code 9500Pol by WhatsApp together with the quantity and dimensions. We will reply with the alternative that best fits your equipment.