Radial shaft seal DBH 9475Pol — 23.00 x 36.00 x 6.00

DBH 9475Pol is a radial shaft seal reference, within Seals. Request a quote for 9475Pol via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9475Pol radial shaft seal is a lip seal that mounts on the shaft and seals against the housing to retain lubricant and stop the entry of dust, water or particles. Its dimensions are 23 mm shaft diameter, 36 mm housing and 6 mm height, with Lz-R-H design. It is used in gearboxes, pumps, electric motors and transmission equipment where there is continuous rotation and contact with oil or grease.

The DBH 9475Pol is a single-lip radial shaft seal, identified by its designation 9475Pol. Its dimensions are 23.00 mm shaft diameter (d), 36.00 mm housing diameter (D) and 6.00 mm height (h). The Lz-R-H design indicates a configuration with sealing lip and reinforced body, suitable for rotating shafts with permanent lubrication. The elastomer of the lip runs on a ground track and the outer body is press-fitted into the housing to prevent rotation and leaks.

This type of seal is used in equipment where oil or grease must be contained and, at the same time, contaminants must be kept out. It appears in gearboxes, centrifugal pumps, electric motors, conveyor rollers, mixers and machine tools. It is also found in agricultural and industrial applications with transmission shafts, where the seal protects the bearings and extends the service life of the assembly. Its compact size makes it common in low and medium power equipment.

To select a seal, verify the shaft diameter, housing diameter and available height. The shaft surface must be ground, without splines or burrs, with hardness and roughness suitable to avoid damaging the lip. The housing must be clean, free of burrs and with the correct diameter so that the seal seats under pressure. During installation, lubricate the lip with the same service oil or grease, avoid striking it and make sure the lip faces the side of the fluid to be retained.

If you need an equivalent or nearby size, send us the code 9475Pol or the dimensions 23 x 36 x 6 mm and the Lz-R-H design. With that data we can look for alternatives in the same radial shaft seal category, verifying that shaft, housing and height match. If space allows, design or material variants can also be evaluated according to the fluid and working temperature. The more data you give us about the equipment, the more precise the search.

To request a quote for the DBH 9475Pol oil seal or ask about a similar size, send the code by WhatsApp to MR Accesorios Industriales. We will reply with the alternatives that best suit your equipment. You can also send us a photo of the old seal or the dimensions taken with a caliper to confirm the reference before ordering.