
DBH 9427 radial shaft seal — 37 x 52 x 7
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
DBH 9427 is a reference of radial shaft seal, within Seals. Request a quote for 9427 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The DBH 9427 seal is a radial seal with a 37 mm shaft diameter, 52 mm housing bore and 7 mm height, with an Lx design. It is used to retain lubricant and exclude contaminants in rotating equipment, such as pumps, electric motors, gearboxes and drive shafts. MR Accesorios Industriales carries this brand and helps you identify the size you need.
This item is a DBH radial shaft seal, identified by part number 9427. Its dimensions are 37 mm shaft diameter (d), 52 mm housing bore (D) and 7.00 mm height (h). The Lx design indicates a configuration with a sealing lip and a specific profile for retaining oil or grease. It is a replacement part for rotating shafts where leaks and the ingress of dust or water must be prevented.
Seals such as the DBH 9427 are used in centrifugal pumps, electric motors, gearboxes, compressors, drive shafts and process equipment. They also appear in automotive, agricultural and industrial applications where a shaft rotates inside a housing and the lubricant must be kept inside while contaminants are kept out. Their function is critical to the service life of bearings and gears.
To install a seal, check that the shaft and housing are clean, with no burrs or marks. Lubricate the lip with the same oil or grease used in the equipment before inserting it. Place the seal perpendicular to the shaft, using a tube or socket that presses on the outer ring, never on the lip. If the shaft shows wear, consider a seal with an auxiliary lip. Selection depends on speed, temperature and fluid type.
To quote part number 9427 or the dimensions 37 x 52 x 7 mm, send us a message on WhatsApp. You can also send a photo of the old part or the housing. At MR Accesorios Industriales we check the data against the manufacturer's product page to offer you the right option.
To request a quote for the DBH 9427 seal, write to us on WhatsApp with the part number and the quantity you need. We will reply with alternatives if applicable. MR Accesorios Industriales markets power transmission, sealing and mounting components.
Dimensions
- Shaft (d)
- 37mm
- Housing bore (D)
- 52mm
- Height (h)
- 7.00mm
- Design
- Lx
Frequently Asked Questions
- What are the dimensions of the DBH 9427 seal?
- The DBH 9427 seal has a 37 mm shaft diameter, a 52 mm housing bore diameter and a 7.00 mm height. These dimensions correspond to the Lx design. It is always advisable to verify the manufacturer's product page before installing.
- How do I ask for an equivalent size?
- You can send us part number 9427 or the dimensions 37 x 52 x 7 mm on WhatsApp. A photo of the part as well. With that data we look for alternatives in the same series or with similar characteristics so you can evaluate the best option.
- What care should I take when installing a seal?
- Clean the shaft and housing thoroughly, lubricate the lip with the equipment lubricant and place the seal perpendicular to the shaft. Use a tube that presses on the outer ring, never on the lip. Avoid striking or deforming the part during installation.

