Radial shaft seal DBH 9424 — 36.00 x 58.00 x 8.00

DBH 9424 is a radial shaft seal reference, within Seals. Request a quote for 9424 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9424 oil seal is a single-lip radial shaft seal that fits into the housing to retain lubricant and prevent contaminants from entering rotating shafts. Its dimensions are 36 mm shaft diameter, 58 mm housing diameter and 8 mm height, with Lx design. It is used in gearboxes, pumps, electric motors and power transmission equipment, where the shaft rotates and the bearings must be protected. MR Accesorios Industriales supplies it as an official brand.

This item is a DBH 9424 radial shaft seal, identified by its numeric designation. According to the product page data, it has a shaft diameter of 36 mm, a housing diameter of 58 mm and a height of 8.00 mm. The Lx design indicates a single-lip configuration with spring, suitable for lubricated rotating shafts. The elastomeric lip seals against the shaft and the metal case fits into the housing. It is a common replacement part in industrial maintenance.

Typical applications include gearboxes, centrifugal pumps, electric motors, reducers and belt or chain drive equipment. In all cases, the oil seal prevents oil or grease leaks and blocks dust, water or particles that could damage the bearings. It is also used on fan, mixer and conveyor shafts. It is always advisable to verify that the oil seal is compatible with the type of lubricant and the peripheral speed of the shaft.

To install an oil seal, check the condition of the shaft and housing: no burrs, no wear and with the appropriate roughness. The oil seal is inserted with a press or an installation tube, applying uniform force on the case, never on the lip. Before installing it, lubricate the lip with the same oil or grease used in the equipment. The selection depends on speed, temperature and differential pressure. If the shaft has a groove, consider a nearby size or an oil seal with an offset lip.

If you need an equivalent or a close size, the most practical thing is to send the code 9424 or the dimensions 36 x 58 x 8 mm via WhatsApp. You can also provide the original part number, a photo of the old oil seal or the dimensions measured with a caliper. At MR Accesorios Industriales we review alternatives within the same seals and oil seals category. The idea is that you don't stop your machine for a part that can be sourced.

Remember that this DBH 9424 oil seal is supplied as an official brand that MR distributes. If you have doubts about the designation, height or design, send us the code via WhatsApp and we will confirm the technical data sheet. At MR Accesorios Industriales we work with seals and oil seals for maintenance, and we help you find the size you need.