DBH 9422 radial shaft seal — 50 x 80 x 8

DBH 9422 is a reference of radial shaft seal, within Seals. Request a quote for 9422 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 9422 radial shaft seal is a lip seal that mounts in the housing and seals against the rotating shaft to retain lubricant and block the entry of dust, water or particles. Its Lx design and dimensions of 50 mm shaft, 80 mm housing and 8 mm height make it suitable for equipment with medium-section shafts. It is used in pumps, electric motors, gearboxes and industrial transmissions.

The DBH 9422 is a radial shaft seal with an Lx design and the following dimensions: shaft diameter 50 mm, housing diameter 80 mm and height 8.00 mm. The sealing lip runs on the shaft and the outer case fits into the housing. The Lx designation indicates a specific construction within the DBH line, which you can confirm against the manufacturer's data sheet if you need details on the lip or the spring.

These seals are used in centrifugal pumps, electric motors, gearboxes, transmission shafts and process equipment. Their function is twofold: to prevent oil or grease leaks and to stop the entry of contaminants. In environments with dust, wash water or fine chips, a well-selected seal extends the life of bearings and gears. They are also used in applications where the shaft rotates at moderate speed and the temperature is not extreme.

For installation, check that the shaft is clean, free of burrs and marks, and that the housing is not dented. Lubricate the lip with the same oil or grease used in the equipment before inserting it. The seal must go in perpendicular, without deforming the lip; use a tube or press that bears on the outer edge. If the shaft shows wear, consider a seal with an offset lip. Selection depends on speed, temperature and the fluid to be retained.

If you need an equivalent or a different size, send us the complete seal part number, the shaft, housing and height dimensions, and a photo or sample if possible. We can also look for an alternative in another brand or series with the same dimensions. At MR Accesorios Industriales we advise you so the seal fulfills its function without oversizing.

To request a quote for the DBH 9422, send the part number by WhatsApp to MR Accesorios Industriales. We will reply with replacement options. At MR Accesorios Industriales we know the details that make a seal last: proper installation, adequate lubrication and the correct size.