Radial shaft seal DBH 9413 — 45.00 x 58.00 x 8.00

DBH 9413 is a radial shaft seal reference, within Seals. Request a quote for 9413 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9413 radial shaft seal is a lip seal designed for rotating shafts. Its function is to retain lubricant inside the assembly and prevent the ingress of dust, water or particles that could damage bearings and gears. With dimensions of 45 mm shaft, 58 mm housing and 8 mm height, and an Lx design, it is press-fitted into the housing and runs on the rotating shaft. It is a wear part that should be replaced when oil leakage appears or play is detected.

This DBH 9413 oil seal has a shaft diameter of 45 mm, a housing diameter of 58 mm and a height of 8.00 mm. The Lx design corresponds to a single-lip seal with a spring, intended for rotating shafts with lubrication. DBH is a brand that MR supplies, so you can ask about its equivalents. It is used in pumps, electric motors, gearboxes and transmission equipment where the shaft passage through the housing must be sealed.

Typical applications for an oil seal such as the DBH 9413 include centrifugal pumps, electric motors, gear reducers, drive shafts and process equipment. In all cases, the oil seal prevents oil or grease leaks and protects the bearings from contaminant ingress. It is commonly found in equipment where the shaft rotates at moderate speeds and the working temperature is not extreme. If the oil seal fails, it usually shows up as a visible lubricant leak or as noise in the bearings due to lack of lubrication.

To install this oil seal correctly, check that the shaft measures 45 mm and the housing 58 mm, with adequate depth for the 8.00 mm height. The lip must be lubricated before inserting the shaft, and it is advisable to use an installation tool that bears on the outer edge of the seal, never on the lip. Check that the shaft shows no wear or burrs in the contact area; if there is a marked groove, consider shifting the seal slightly or replacing the shaft. Cleaning the housing is essential to prevent leaks.

If you need a nearby size or an equivalent, you can send us the code 9413 or the dimensions of your current oil seal (shaft diameter, housing and height) via WhatsApp. At MR Accesorios Industriales we have more than 80 years of experience in the industry and can guide you to find the right oil seal. We can also advise you on the lip type, material and spring according to your equipment conditions. Do not hesitate to ask us about other brands or special configurations.

To request a quote for the DBH 9413 oil seal or any of its equivalents, send the code via WhatsApp to MR Accesorios Industriales. We will reply with the technical information and alternatives. Remember that a correctly selected oil seal extends bearing service life and reduces maintenance downtime.