DBH 9412 radial shaft seal — 62 x 95 x 10

DBH 9412 is a reference of radial shaft seal, within Seals. Request a quote for 9412 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 9412 seal is a radial seal of 62 mm shaft diameter, 95 mm housing diameter and 10 mm height, with Lx design. It is used to retain lubricant and exclude contaminants in rotating equipment, protecting bearings and bushings. Its flexible lip compensates for small misalignments and maintains dynamic sealing. It is a wear part that should be replaced when oil loss or dirt ingress appears. MR Accesorios Industriales carries this brand and advises you on choosing the correct seal.

The DBH 9412 is a radial shaft seal with the following dimensions: shaft diameter 62 mm, housing diameter 95 mm and height 10 mm. Its Lx design corresponds to a seal with a sealing lip and spring, intended for rotating shafts. The designation 9412 identifies the size in the DBH catalogue. This type of seal is press-fitted into the housing and its lip bears on the shaft, creating a barrier against oil or grease leaks and against external dust.

Typical applications include gearboxes, pumps, electric motors, transmission shafts and continuous process equipment. In all cases, the seal protects the nearby bearings or bushings, preventing lubricant from escaping and external particles from entering. It is commonly found in industrial machinery, pumping equipment and transmission systems where the shaft rotates at moderate speeds and the service temperature is stable.

To mount a radial shaft seal, check that the shaft and housing are clean, free of burrs and marks. Lubricate the lip with the same oil or grease used in the equipment before inserting it. The seal must enter perpendicular to the shaft, without direct blows on the lip. If the housing has a chamfer, this makes insertion easier. Selection depends on speed, temperature and the fluid to be retained; these data are confirmed against the manufacturer's product page for each application.

If you need a seal or an equivalent from another brand, send us part number 9412 or the shaft, housing and height dimensions. You can also send a photo of the part or the housing. At MR Accesorios Industriales we review alternatives within the same series and guide you so the replacement is compatible.

To order the DBH 9412, write to us on WhatsApp with the part number and quantity. If you have questions about mounting or compatibility, ask us and we will give you a hand. We work with brands and we support factories and plants with technical advice.