Radial shaft seal DBH 9383 — 62.00 x 100.00 x 10.00

DBH 9383 is a radial shaft seal reference, within Seals. Request a quote for 9383 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9383 radial shaft seal is a lip seal mounted between a rotating shaft and a fixed housing to retain lubricant and block the entry of dust, water or particles. With a 62 mm shaft diameter, 100 mm housing diameter and 10 mm height, this size covers gearboxes, pumps and medium-sized transmission equipment. Its Lx design defines the lip profile and the housing type, data that should be cross-checked with the manufacturer's product page before installation.

The DBH 9383 is a radial lip seal with the following dimensions: shaft diameter d of 62 mm, housing diameter D of 100 mm and height h of 10 mm. The indicated design is Lx, which in practice defines the lip geometry and the outer housing. It is a compact-section seal, designed for housings where axial space is limited and a reliable barrier against oil or grease leaks is required.

It is used in gearboxes, centrifugal pumps, electric motors, transmission shafts and process equipment where a shaft rotates inside a housing and the lubricant must be separated from the environment. It also appears in applications exposed to dust or splashes, where the lip must run on a ground and lubricated shaft. It is a wear part: when it starts to fail, the leak shows in the seal area.

To select it, verify that the shaft diameter, housing diameter and height match those of the DBH 9383. The shaft must be ground, without splines or burrs in the contact area, and the housing clean and free of deformation. Before installation, lubricate the lip with the same grease or oil used in the equipment and avoid hitting or inverting it. If the shaft is worn, consider a repair sleeve or a nearby size.

If you need an equivalent or a nearby size, send us the code 9383 along with the shaft, housing and height dimensions, and a photo of the old seal if you have it on hand. With that data we can cross-reference the designation with other brands or look for a variant in the same family. If the Lx design is not the right one, we also check it against the manufacturer's product page before quoting.

MR Accesorios Industriales sells the DBH brand and has more than 80 years in the industry. If you want to confirm that this seal fits your equipment, write to us on WhatsApp with the code 9383 and the dimensions. We'll reply with the quote and, if needed, with alternatives from the same family.