Radial shaft seal DBH 9367 — 36.00 x 72.00 x 8.00

DBH 9367 is a radial shaft seal reference, within Seals. Request a quote for 9367 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9367 radial shaft seal is a lip seal that mounts in the housing and seals against the rotating shaft to retain lubricant and block the entry of dust, water or particles. Its dimensions of 36 mm shaft, 72 mm housing and 8 mm height place it in medium-size transmission and rotating equipment. It is a wear part: when oil leakage or dirt ingress appears, it is replaced with a seal of the same designation.

This item is a DBH 9367 radial shaft seal, identified by its numeric designation and by the Lx design. The dimensions listed in its data sheet are 36 mm shaft diameter, 72 mm housing diameter and 8.00 mm height. The Lx design corresponds to a single-lip seal with a metal case and sealing lip, intended for lubricated rotating shafts. The DBH brand is an official brand that MR supplies, so the 9367 code can be checked against the catalog to confirm the exact geometry before quoting.

Typical applications for a seal of these dimensions appear in gearboxes, pumps, electric motors, rollers and power transmission equipment. In all cases it performs the same function: keeping lubricant inside the assembly and preventing the environment from entering the bearings or gears. It is also used as a secondary closure on shafts rotating at moderate speed and in equipment exposed to dust or splashes. If the equipment operates with high vibration or misalignment, it is advisable to check the condition of the shaft before installing the new seal.

To select and install a seal, you must verify three things: that the shaft diameter is within the recommended tolerance, that the housing has no burrs or marks, and that the seal height matches the available depth. The lip is lubricated before installation and pressed with a tube or spacer that pushes evenly on the case, never on the lip. If the shaft shows wear or a marked groove, the new seal may not seal even if it is the correct size. In that case, a wear sleeve or a seal with the lip in another position is evaluated.

If you need an equivalent or a nearby size, the most practical approach is to send the 9367 code along with the dimensions taken from the shaft and housing. With that data, an alternative from the same brand or from another firm that MR supplies can be found, always confirming the manufacturer's technical data sheet. Sending a photo of the old seal and the housing also helps, because it shows the lip type, the case and the condition of the surface. The seal does not need to be in good condition: the more information you send, the faster the response.

To request a quote for the DBH 9367 oil seal or ask about a nearby size, write to us on WhatsApp with the code and dimensions. At MR Accesorios Industriales we work with seals and oil seals for industrial equipment and can guide you toward the option that best fits your application. If the seal is mounted in a critical assembly, it is advisable to also request the associated bearing or bushing and check the condition of the shaft before assembly.