Radial shaft seal DBH 9347 — 26.00 x 50.00 x 8.00

DBH 9347 is a radial shaft seal reference, within Seals. Request a quote for 9347 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9347 radial shaft seal is a lip seal that mounts in the housing and seals against the rotating shaft to retain lubricant and block the entry of dust, water or particles. With a 26 mm shaft, 50 mm housing and 8 mm height, and Lx design, it is a commonly used size in industrial equipment. MR Accesorios Industriales carries this brand and quotes it by WhatsApp.

The DBH 9347 is a radial shaft seal with the following dimensions: shaft diameter 26 mm, housing diameter 50 mm and height 8.00 mm. Its Lx design corresponds to a single lip seal with spring, intended for lubricated rotating shafts. The elastomeric lip bears on the shaft and the metal case fits into the housing, so the seal stays firm and centered. It is a wear part: when the lip hardens or becomes marked, it starts to lose oil.

It is used in gearboxes, pumps, electric motors, mixers, conveyors and power transmission equipment in general. It also appears in machine tools, compressors and hydraulic systems where a shaft rotates inside an oil-filled housing. In all these cases it performs the same function: preventing lubricant leaks to the outside and preventing contaminants from entering. It is one of the least expensive parts of the equipment and, at the same time, one of those that prevents the most downtime when replaced in time.

To select a seal, take into account the shaft diameter, the housing diameter and the height, which must match the actual housing and shaft. Also check the condition of the running surface: if the shaft is worn, grooved or scratched, the new lip will not seal properly. During assembly, lubricate the lip with the same oil used in the equipment, insert it perpendicular to the shaft and do not strike it from the side. If the housing has burrs or the shaft has a sharp edge, protect the lip with tape or a cone so it is not cut.

If you cannot find part number 9347 or you need a nearby size, send us the dimensions of the old seal: shaft diameter, housing diameter and height, plus a photo of the part and the housing. With that data we look for the equivalent in DBH or another brand we carry. If the Lx design is not the right one, we can also advise you on the appropriate variant according to the type of service, speed and lubricant of the equipment.

To request a quote for the DBH 9347 oil seal, write to us on WhatsApp at MR Accesorios Industriales with part number 9347 or with the dimensions 26 x 50 x 8 mm. We will send you the quote. If you have questions about assembly or want to replace a seal that has already failed, send us the photos and we will help you identify the correct part.