Radial shaft seal DBH 9300 — 47.00 x 62.00 x 8.00

DBH 9300 is a radial shaft seal reference, within Seals. Request a quote for 9300 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9300 radial shaft seal is a lip seal that mounts in the housing and seals against the rotating shaft to retain lubricant and stop dust, water or particles from entering. Its 9300 designation corresponds to a size of 47.00 mm shaft, 62.00 mm housing and 8.00 mm height, with Lx design. It is used in gearboxes, pumps, electric motors and power transmission equipment where bearings must be protected and lubrication maintained in continuous service.

This item is a DBH 9300 radial shaft seal with the following dimensions: 47 mm shaft diameter (d), 62 mm housing diameter (D) and 8.00 mm height (h). The Lx design indicates the lip and outer body configuration. It is a compact-section seal, intended for housings where axial space is limited and a reliable seal on the shaft is required. DBH is an official brand that MR carries.

Typical applications for a seal of this size include gearboxes, reducers, centrifugal pumps, electric motors, drive shafts and process equipment. In every case it performs the same function: keeping oil or grease inside the housing and preventing external contamination from reaching the bearings or bushings. It is also used as a secondary seal in equipment exposed to dust, chips or wash water.

For installation, check that the shaft has no burrs or marks that could damage the lip and that the housing is clean and free of deformation. Lubricate the lip with the same grease or oil used in the equipment before inserting it, and press it in with a flat driver so it does not twist. When selecting, take shaft speed, operating temperature and fluid type into account; if the original seal has a different height or design, it is best to compare the product page before replacing it.

If you need an equivalent or a nearby size, send us part number 9300 along with the shaft, housing and height dimensions, or a drawing or photo of the old seal. With that data we look for the closest option within the DBH line or other brands we carry. We can also advise you if the Lx design is not right for your application and a different lip type or material is needed.

To request a quote for the DBH 9300 oil seal, message MR Accesorios Industriales on WhatsApp with the part number and the quantity you need. If you have doubts about the size or design, attach a photo of the original seal and the shaft and housing dimensions. That way we confirm the reference and send you the quote without hassle.