DBH 9296 radial shaft seal — 48 x 62 x 7

DBH 9296 is a reference of radial shaft seal, within Seals. Request a quote for 9296 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 9296 oil seal is a single-lip radial shaft seal that mounts on the shaft and seals against the housing to retain lubricant and block the entry of dust, water or particles. It is used in gearboxes, pumps, electric motors and power transmission equipment. MR Accesorios Industriales carries this brand and advises you on choosing the right seal according to shaft size, housing and operating conditions.

This item is a DBH radial shaft seal with designation 9296. Its dimensions are 48.00 mm shaft diameter, 62.00 mm housing diameter and 7.00 mm height. The Lx design corresponds to a single sealing lip with spring, intended for rotating shafts with lubrication. The nominal shaft size is the main reference for mounting: the lip must rest with slight interference on the shaft raceway, without deforming or sitting loose.

Typical applications for a seal of this size include gearboxes, centrifugal pumps, electric motors, compressors and transmission equipment. In all cases it performs two functions: retaining the oil or grease inside the assembly and preventing contaminants from entering from outside. It is also used as a secondary closure in bearings and bushings where axial space is limited, since its 7 mm height allows mounting in compact housings.

To select the correct seal, verify that the shaft diameter and housing diameter match the values on the product page. Check the condition of the raceway: if it has scratches or wear, the lip will not seal properly even if the size is correct. During mounting, lubricate the lip with the same oil used in the equipment, insert it perpendicular to the shaft and avoid striking it. If the seal operates under pressure or elevated temperature, consult us before replacing it with another design.

To request a quote, send us the full part number and the shaft, housing and height dimensions. With that data we can look for a compatible alternative within the lines we carry. We can also advise you if the Lx design is not suitable for your application and another lip type or material should be considered.

To request a quote for the DBH 9296 oil seal or ask about an equivalent size, send the part number by WhatsApp to MR Accesorios Industriales. We will reply with the technical information and the corresponding quote.