DBH 9202Vit radial shaft seal — 36.5 x 52.3 x 8

DBH 9202Vit is a reference of radial shaft seal, within Seals. Request a quote for 9202Vit via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 9202Vit radial shaft seal is a lip seal that closes the passage of oil or grease between a rotating shaft and its housing. With a 36.50 mm shaft diameter, 52.30 mm housing diameter and 8.00 mm height, and Lx-R-H design, it is press-fitted into crankcases, covers and gearboxes. MR Accesorios Industriales sells this brand and advises you so that you choose the correct oil seal for your equipment.

This item is a DBH 9202Vit radial shaft seal, identified by its exact designation and by three dimensions: 36.50 mm shaft diameter (d), 52.30 mm housing diameter (D) and 8.00 mm height (h). The Lx-R-H design indicates the configuration of the lip and the body: a spring-loaded sealing lip that ensures constant contact on the shaft. It is a component of the seals and oil seals category, intended to retain lubricant and block contaminants in equipment with rotary motion.

Typical applications of an oil seal of these dimensions appear in gearboxes, pumps, electric motors, transmission shafts and rollers. In each case, the oil seal works on a shaft that rotates inside a fixed housing, and its function is to prevent oil leaks and the entry of dust or water. It is a wear part: when the lip hardens or becomes marked, it starts to leak and it is advisable to replace it before it damages the bearing or the shaft.

To mount it properly, verify that the shaft diameter and the housing diameter match the values on the data sheet, that the shaft has no burrs or wear and that the housing is clean and free of impacts. Lubricate the lip before inserting it and do so with a flat tool so as not to deform it. If the shaft shows a deep groove, consider an oil seal with the lip in another position or a repair sleeve. The selection depends on the fluid, the temperature and the rotation speed of the equipment.

If you need an equivalent, the most practical thing is to send us the code 9202Vit together with the shaft and housing dimensions, and a photo of the old part if you have it. With that data we look for alternatives within the same brand or another that fits the mounting.

At MR Accesorios Industriales we work with DBH oil seals and other sealing lines so that you find the part your equipment needs. Send the code 9202Vit or the dimensions on WhatsApp and we will quote you with no obligation. If you are unsure between two sizes, write to us anyway: we help you confirm which one corresponds before ordering it.