Radial shaft seal DBH 9154 — 35.00 x 72.00 x 12.00

DBH 9154 is a radial shaft seal reference, within Seals. Request a quote for 9154 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9154 radial shaft seal is a lip seal designed for rotating shafts. Its function is to retain lubricant inside the housing and prevent the ingress of dust, water or contaminating particles. With dimensions of 35 mm shaft, 72 mm housing and 12 mm height, and an Lx design, it is used in gearboxes, pumps, electric motors and industrial equipment in general. MR Accesorios Industriales carries this brand and advises you so you can choose the right seal.

This item is a radial shaft seal from the DBH brand, identified by the code 9154. Its dimensions are 35 mm shaft diameter (d), 72 mm housing diameter (D) and 12.00 mm height (h). The Lx design corresponds to a seal with a single sealing lip and spring, suitable for rotating shafts with lubrication. The lip is made of an elastomer resistant to oil and temperature, while the outer body is made of a rigid material for a firm fit in the housing. It is a wear part that requires periodic replacement.

Typical applications of this seal include gearboxes, speed reducers, centrifugal pumps, electric motors, compressors and transmission equipment. In all cases, its function is to confine the lubricant and protect the bearings and gears from the ingress of external contaminants. It is also used in agricultural machinery, material handling equipment and process lines where there are rotating shafts passing through a housing. Selecting the right seal extends the service life of the internal components.

To install the seal correctly, check that the shaft has the proper hardness and roughness, with no burrs or marks that could damage the lip. Lubricate the lip with the same oil or grease used in the equipment before inserting it. The housing must be clean and free of deformation; place the seal perpendicular to the shaft and press evenly all the way to the bottom. If the shaft shows wear, consider a nearby size or a seal with the lip in another position. If in doubt, consult our technical team.

If you need an equivalent seal or a close size, contact us on WhatsApp and mention the code 9154 or the dimensions 35 x 72 x 12 mm. We can look for alternatives in other brands or configurations, always respecting the critical dimensions of shaft, housing and height. We also advise you on the most suitable lip design according to the speed, temperature and type of lubricant in your application. MR Accesorios Industriales has more than 80 years of experience in the field.

To request a quote for the DBH 9154 seal, write to us on WhatsApp with the code or the dimensions. We reply with the purchasing options. If you have a sample or a photo of the part, even better: that way we confirm that the designation matches what you need. We are in Buenos Aires, Argentina, and we serve the entire country. MR Accesorios Industriales, since 1945, supplying quality seals and oil seals for industry.