DBH 9146 radial shaft seal — 30 x 60 x 10

DBH 9146 is a reference of radial shaft seal, within Seals. Request a quote for 9146 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 9146 radial shaft seal is a lip seal that mounts in the housing and seals against the rotating shaft to retain lubricant and block the entry of dust, water or particles. With dimensions of 30 mm shaft, 60 mm housing and 10 mm height, and Lx design, it is a common replacement part in gearboxes, pumps and power transmission equipment. MR Accesorios Industriales sells it as part of its seals and oil seals line.

This item is a DBH 9146 radial shaft seal, identified by the designation 9146. Its dimensions are 30.00 mm shaft diameter (d), 60.00 mm housing diameter (D) and 10.00 mm height (h). The Lx design corresponds to the lip and metal body configuration according to the series standard. It is a single lip seal, intended for rotating shafts with permanent lubrication, and is press-fitted into the housing. DBH is a brand that MR carries.

Typical applications for a seal of these dimensions include gearboxes, reducers, centrifugal pumps, electric motors, rollers and power transmission equipment. In all cases it serves to retain the oil or grease inside the assembly and prevent contaminants from entering from outside. It is also used as a secondary closure in housings and hubs where a shaft rotates inside a fixed casing.

To correctly select and install this seal, verify that the shaft and housing diameters match the values indicated, and that the height is compatible with the housing depth. The shaft must be clean, free of burrs and marks, and it is advisable to lubricate the lip before inserting it. Installation is done with a flat tool that presses on the outer ring, never striking the lip. If the shaft shows wear, consider a seal with a wider lip.

If you need an equivalent or a different size, the most practical approach is to send us the part number 9146 along with the shaft, housing and height dimensions shown on the equipment. With that data we can look within the same series or from another brand we carry. We can also advise you if the Lx design is not suitable for your application and a different type of lip or material is needed.

To request a quote for the DBH 9146 oil seal or ask about an equivalent size, send the part number by WhatsApp to MR Accesorios Industriales. We will reply with the alternatives we have in the seals and oil seals line. If the equipment is disassembled, a photo of the housing and shaft helps confirm the correct size before ordering.