DBH 9110 radial shaft seal — 32 x 45 x 10

DBH 9110 is a reference of radial shaft seal, within Seals. Request a quote for 9110 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 9110 oil seal is a single-lip radial seal, designed to retain lubricant and exclude contaminants on shafts that rotate inside a cylindrical housing. Its dimensions are 32 mm shaft diameter, 45 mm housing diameter and 10 mm height, with Lx design. It is used in gearboxes, pumps, electric motors and power transmission equipment, where the seal is the barrier that prevents leaks and the entry of dust or water into the bearing.

This item is a DBH radial shaft seal, identified by part number 9110. It runs on a 32 mm diameter shaft, fits into a 45 mm bore and has a total height of 10 mm. The Lx design corresponds to a single sealing lip with an outer metal case, the most common format for press fitting into a rigid housing. The sealing lip rests on the shaft and, with the help of an internal spring, maintains contact during rotation.

Typical applications for a seal of these dimensions appear in gearboxes, centrifugal pumps, electric motors, spindles and belt or chain drive equipment. In all these cases it performs two functions: retaining the oil or grease inside the assembly and blocking the entry of dust, chips or water from outside. When the seal works alongside a bearing, its condition directly affects the service life of the bearing and the cleanliness of the lubricant.

To install it, check that the shaft is clean, with no burrs or deep marks in the contact area, and that the housing has no dents. Lubricate the lip before inserting it and place the seal with a support tube that pushes on the outer diameter, never on the lip. If the shaft shows wear, you can consider a seal with the lip in a different position. The final selection depends on the speed, temperature and type of lubricant in the equipment.

To quote part number 9110 along with the shaft, housing and height dimensions, or directly the drawing or photo of the old part, send us. With that data we review alternatives within the DBH line and from other brands we carry. We can also advise you if the seal is mounted in an assembly with bearings, so that the choice is compatible with the rest of the system.

MR Accesorios Industriales carries the DBH brand. If this DBH 9110 oil seal is the one you are looking for, write to us on WhatsApp with the part number and we will send you the quote. If you have doubts about the size, send the shaft and housing dimensions and we will help you confirm the replacement.