Product page
Radial shaft seal DBH 9088 — 22.00 x 38.00 x 10.00
- Manufacturer Part Number
- 9088
- Brand
- DBHOfficial brand
- Category
- Seals
- Subcategory
- Radial shaft seals
We respond promptly.
Request your quote via WhatsApp or email, with the quantity and time frame you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
DBH 9088 is a radial shaft seal reference, within Seals. Request a quote for 9088 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.
The DBH 9088 radial shaft seal is a lip seal that mounts in the housing and seals against the rotating shaft to retain lubricant and block the entry of dust, water or particles. Its dimensions of 22 mm shaft, 38 mm housing and 10 mm height place it in small and medium-sized equipment, where axial space is limited and a reliable, easy-to-replace seal is needed.
This item is a DBH 9088 radial shaft seal, identified by its designation 9088 and its Lx design. It runs on a shaft of 22 mm diameter, fits into a housing of 38 mm and has a height of 10 mm. The Lx design corresponds to a single-lip seal with spring, intended for rotating shafts with permanent lubrication and moderate speeds. DBH is an official brand that MR carries, so the replacement part is available under that exact reference.
It is used in gearboxes, centrifugal pumps, electric motors, mixers, conveyors and power transmission equipment where oil or grease must be separated from the environment. It also appears in machine tools, compressors and irrigation systems. In every case it performs the same function: keeping lubricant in and contamination out, extending the service life of bearings and gears.
To install it, check that the shaft is within tolerance and free of burrs, and that the housing has no dents or scratches. Lubricate the lip before inserting it and press the part in straight, without tilting, using a tube or spacer that rests on the outer diameter. If the shaft shows wear, consider a nearby size or a seal with an offset lip. Selection depends on speed, temperature and the type of fluid.
If you need an equivalent or a close size, send us the code 9088 along with the shaft, housing and height dimensions, and the type of application. With that data we look for the DBH alternative or another brand that best fits, respecting the available space and operating conditions. We can also advise you if the Lx design is not the right one for your equipment.
To request a quote for this DBH 9088 oil seal or ask about a similar size, message MR Accesorios Industriales on WhatsApp with the code and dimensions. We will reply with the available reference and replacement options.
Dimensions
- Shaft (d)
- 22mm
- Housing bore (D)
- 38mm
- Height (h)
- 10.00mm
- Design
- Lx
Frequently Asked Questions
- What are the dimensions of the DBH 9088 oil seal?
- The DBH 9088 oil seal has a 22 mm shaft diameter, a 38 mm housing diameter and a 10 mm height. Its design is Lx, with a single lip and spring. These are the dimensions listed on the manufacturer's product page and the ones you need to verify before ordering.
- How do I know if the Lx design is the right one for my equipment?
- The Lx design is used on rotating shafts with continuous lubrication and moderate speeds. If your equipment operates with high pressure, high temperature or a lot of dust, another design may be better suited. Contact us with your machine data and we will advise you.
- Can I replace the 9088 oil seal with another one of similar dimensions?
- Yes, as long as the shaft, housing and height are compatible. Sometimes a nearby size fits with a small adjustment. Send us your equipment dimensions on WhatsApp and we will tell you which alternative we have or can source.