Radial shaft seal DBH 9022 — 90.00 x 110.00 x 12.00

DBH 9022 is a radial shaft seal reference, within Seals. Request a quote for 9022 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9022 oil seal is a single-lip radial shaft seal with a spring, designed for rotating shafts where lubricant must be retained and dust, water or particles kept out. With its size of 90 mm shaft, 110 mm housing and 12 mm height, it is used in gearboxes, pumps, electric motors and power transmission equipment. At MR Accesorios Industriales we carry it as part of our line of seals and oil seals for maintenance and replacement.

The DBH 9022 is a radial shaft seal with an Lx design: elastomer lip with metal spring and outer case. Its dimensions are 90 mm shaft diameter (d), 110 mm housing diameter (D) and 12.00 mm height (h). The flexible lip runs on the rotating shaft and the spring keeps contact pressure constant, while the rigid case seats in the housing bore. It is a wear part: when the lip hardens or gets marked, it starts to leak oil.

Typical applications for this size appear in gearboxes, centrifugal pumps, electric motors, rollers and transmission equipment. It is also used in mixers, agitators and machine tools where the shaft rotates inside a fixed housing. In every case it performs the same function: retaining lubricant on the inner side and preventing environmental contaminants from entering, extending the life of bearings and gears.

To install a seal of this type, check that the shaft is clean, free of burrs and marks, and that the running surface has the right roughness. Lubricate the lip before inserting it and place the seal perpendicular to the shaft, without striking it sideways. If the housing has burrs, run a fine file over it. The 12 mm height lets you replace seals of the same size without modifying the housing. If the shaft is worn, consider a seal with an offset lip or a wear sleeve.

If you need an equivalent or a nearby size, send us code 9022 or the full size 90x110x12 on WhatsApp. You can also send the original manufacturer's code or the dimensions measured with a caliper. At MR Accesorios Industriales we cross-reference the size with the lines we carry and confirm the exact or closest size. If the seal is mounted on critical equipment, it is worth also checking the condition of the shaft and housing before ordering the replacement.

DBH is an official brand that MR carries within its line of seals and oil seals. If you have doubts about installation or want us to help you identify the seal by shaft and housing size, write to us on WhatsApp with code 9022. We'll reply with the alternative that best fits your equipment.