Radial shaft seal DBH 9011 — 150.00 x 170.00 x 10.00

DBH 9011 is a radial shaft seal reference, within Seals. Request a quote for 9011 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 9011 radial shaft seal is a lip seal that mounts in the housing and seals against the shaft to retain lubricant and block the ingress of dust, water or particles. With a 150 mm shaft, a 170 mm housing and a 10 mm height, and an Lx design, it is a replacement part for rotating equipment where reliable sealing prevents oil loss and premature wear of bearings and bushings.

This item is a DBH 9011 radial shaft seal, identified by its designation 9011. Its dimensions are shaft (d) 150 mm, housing (D) 170 mm and height (h) 10.00 mm, with an Lx design. The Lx design corresponds to a single-lip seal with a spring, designed for lubricated rotating shafts. The DBH brand is a brand that MR carries, so you can ask about equivalents within that line.

It is used in equipment with drive shafts, pumps, reducers, electric motors, mixers and conveyors. In general, radial shaft seals of this section are chosen to contain oil or grease in bearing chambers and to protect against the entry of contaminants. The 150 x 170 x 10 mm size matches standard housings, so it often replaces worn seals in preventive or corrective maintenance.

To mount it, check that the shaft and housing are clean, free of burrs and scratches, and lubricate the lip before inserting it. The oil seal must enter perpendicular to the shaft, without blows that deform the lip. Check that the shaft surface has no deep grooves: greater wear can cause leaks even if the oil seal is new. If the equipment runs with high vibration or temperature, ask whether a different compound is advisable.

If you need an equivalent or a neighboring size, send us code 9011 or the measurements 150 x 170 x 10 mm and the type of application. We can search for alternatives in the same brand or in other lines we carry, always respecting the shaft, housing and height dimensions. We can also advise you on the lip design and the most suitable material according to the fluid and rotation speed.

To request a quote for the DBH 9011 oil seal, send the code on WhatsApp to MR Accesorios Industriales. If you have doubts about the size or design, attach a photo of the old part or the measurements taken with a caliper. That way we confirm the correct option and avoid mounting errors.