Radial shaft seal DBH 8899 — 44.00 x 60.00 x 10.00

DBH 8899 is a radial shaft seal reference, within Seals. Request a quote for 8899 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8899 radial shaft seal is a lip seal mounted between a rotating shaft and a fixed housing to retain lubricant and block the entry of dust, water or particles. Its dimensions are 44 mm shaft diameter, 60 mm housing diameter and 10 mm height, with Lx design. It is used in gearboxes, pumps, electric motors and power transmission equipment, where reliable sealing prevents oil loss and premature wear of bearings and gears.

This item is a radial shaft seal from the DBH line, identified with part number 8899. According to the record, the shaft diameter is 44 mm, the housing diameter is 60 mm and the height is 10.00 mm. The Lx design corresponds to a seal with a sealing lip and metal body, intended for press fitting into the housing. These three dimensions define compatibility: if the shaft or housing do not match, the seal will not seal correctly.

Typical applications for a seal of these dimensions include gearboxes, reducers, centrifugal pumps, electric motors, compressors and transmission equipment. In all cases, the seal separates the lubricated interior from the outside environment. It is also used in machine tools, food industry equipment and conveying systems, where dust or water can contaminate the lubricant and accelerate the failure of bearings and gears.

To install a radial shaft seal, check that the shaft is clean, free of burrs and marks, and that the sealing surface has the appropriate roughness. The housing must be machined with the correct tolerance and free of damage. Lubricate the lip before inserting it and fit the seal with an installation tube that bears on the outer diameter, never on the lip. If the shaft shows wear, consider a nearby size or a seal with an auxiliary lip.

If you need an equivalent or a different size, send us part number 8899 together with the shaft, housing and height dimensions. We can also look for a seal from another brand or series with the same dimensions. At MR Accesorios Industriales we carry seals and oil seals from different lines; with the correct data we guide you so the replacement is the right one. Quotes are handled by WhatsApp.

MR Accesorios Industriales has more than 80 years in the industrial sector and carries the DBH brand as part of its seals line. If you have doubts about the designation or want to confirm the size, write to us on WhatsApp with part number 8899 and we will reply with the available information. We can also advise you on installation tools and compatible lubricants so the seal works under the right conditions.