Radial shaft seal DBH 8896 — 46.00 x 59.00 x 9.00

DBH 8896 is a radial shaft seal reference, within Seals. Request a quote for 8896 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8896 radial shaft seal is a lip seal designed to close off the passage of oil or grease on rotating shafts, while at the same time preventing the entry of dust, water or particles. It is press-fitted into the housing and works on the shaft with a flexible lip that maintains contact. It is a wear part: when lubricant loss or dirt ingress appears, it should be replaced. MR Accesorios Industriales carries this brand and advises you on choosing the correct size.

This item is a radial shaft seal from the DBH brand, identified with part number 8896. Its dimensions are: shaft diameter 46 mm, housing diameter 59 mm and height 9.00 mm. The indicated design is Lx, which corresponds to a single lip with spring. These are the dimensions you must verify before ordering: the shaft where the lip bears, the housing where it is press-fitted and the available width. If any of them does not match, do not force it: we will look for the nearby size.

Typical applications for a seal of these dimensions are in gearboxes, pumps, electric motors, transmission shafts and equipment with bearings lubricated with oil or grease. It is also used in agricultural machinery, conveyors and process equipment where there is continuous rotation and the presence of dust or moisture. The function is always the same: retaining the lubricant on the inner side and blocking external contamination, extending the life of bearings and gears.

To install it properly, clean the housing and the shaft, and verify that there are no burrs or deep marks on the running surface. Lubricate the lip with the same grease or oil as the equipment before inserting it. Position it perpendicular, without striking the lip, using a tube or driver that bears on the outer ring. If the shaft is worn, consider a repair sleeve or an alternative size. Selection depends on speed, temperature and the type of fluid to be retained.

If you cannot find part number 8896 or need a different size, send us the dimensions of your old seal: shaft diameter, housing diameter and height. A photo of the part with a caliper next to it also helps. With these data we look for the equivalent in DBH or another brand we carry, respecting the lip type and design. You do not need to have the original part number: the actual housing and shaft dimensions are enough.

To request a quote for this DBH 8896 seal, write to us on WhatsApp and send us the part number or the dimensions. We will confirm the quote and the alternative if it is not available. MR Accesorios Industriales works with brands it carries and with in-house manufacturing, and helps you resolve the replacement without hassle.