Radial shaft seal DBH 8876 — 24.00 x 40.00 x 8.00

DBH 8876 is a radial shaft seal reference, within Seals. Request a quote for 8876 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8876 radial shaft seal is a lip seal that closes off the passage of oil or grease between a rotating shaft and its housing. With a 24 mm shaft diameter, 40 mm housing diameter and 8 mm height, and an Lx design, it is used in gearboxes, pumps and motors to retain lubricant and stop dust from entering. MR Accesorios Industriales sells it as part of its seals and oil seals line.

This item is a DBH 8876 radial shaft seal, identified by the code 8876. Its dimensions are 24.00 mm shaft diameter (d), 40.00 mm housing diameter (D) and 8.00 mm height (h). The Lx design corresponds to a single-lip seal with a spring, intended for rotating shafts with lubrication. DBH is a brand that MR sells, so the product arrives with its original designation and not as a generic adaptation.

Typical applications for a seal of these dimensions appear in equipment with transmission shafts: gearboxes, centrifugal pumps, electric motors, compressors and machine tools. In every case it performs the same function: preventing oil or grease leaks to the outside and blocking the entry of contaminants such as dust or water. It is also used in power transmission equipment and in assemblies where the shaft rotates inside a fixed housing.

To install a radial shaft seal, check that the shaft diameter and the housing diameter match the values on the product page, that the shaft has no burrs or wear in the contact area, and that the housing is clean and free of dents. The lip is lubricated before inserting it and it is seated with a suitable tube or driver, without hitting the spring. If the shaft shows a marked groove, a nearby size or a design with an auxiliary lip can be considered.

If you need an equivalent or a different size, send us the code 8876 along with the shaft, housing and height dimensions, and a photo or sample of the old seal. With that data we can look for an alternative within the same series or from another brand we sell. We can also advise you if the housing has a shoulder or if the original seal runs submerged.

To request a quote for the DBH 8876 oil seal or ask about a nearby size, write to us on WhatsApp at MR Accesorios Industriales with the code and the dimensions. We will reply with the alternatives we have in the seals and oil seals line.