Radial shaft seal DBH 8607Pol — 48.00 x 70.00 x 9.00

DBH 8607Pol is a radial shaft seal reference, within Seals. Request a quote for 8607Pol via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8607Pol radial shaft seal is a lip seal designed to retain lubricant and exclude contaminants on rotating shafts. Its dimensions of 48 mm shaft diameter, 70 mm housing diameter and 9 mm height make it suitable for gearboxes, pumps and power transmission equipment. If you need to replace a worn oil seal or select the seal for a new assembly, this DBH model is an option with standard dimensions, quoted through MR Accesorios Industriales.

The DBH 8607Pol is an Lx-R-H design oil seal, with a retaining lip and a reinforced body. Its dimensions are 48 mm shaft diameter (d), 70 mm housing diameter (D) and 9.00 mm height (h). This combination of dimensions positions it as a medium-sized seal, suitable for shafts rotating at moderate speeds that require a reliable barrier against oil or grease leaks. The 8607Pol designation identifies the geometry and the lip material, which conforms to the usual tolerances of the series.

Typical applications for this oil seal include gearboxes, centrifugal pumps, electric motors, conveyor rollers and belt or chain drive equipment. In all these cases, the oil seal prevents lubricant loss and the entry of dust, water or particles that accelerate the wear of bearings and gears. Because of its size, it is common in agricultural machinery, process equipment and continuous conveying systems.

For correct installation, check that the shaft has adequate surface hardness and controlled roughness; a scratched or excessively worn shaft can damage the lip and cause leaks. The housing must be clean, free of burrs and deep enough to accommodate the 9 mm height. During installation, lubricate the lip with the same oil or grease used in the equipment and avoid striking it. If the previous oil seal failed, also check the condition of the bearing and the shaft alignment.

If you need a nearby size or an equivalent from another brand, send us the part number 8607Pol or the dimensions 48x70x9 by WhatsApp. At MR Accesorios Industriales we can look for alternatives with the same shaft and housing diameter, or with a similar height, depending on what the factories offer. We can also advise you on the lip material (nitrile, viton, polyurethane) according to the temperature and the fluid in your application.

To request a quote for the DBH 8607Pol oil seal, write to us on WhatsApp stating the quantity and the part number. At MR Accesorios Industriales we carry this brand and can confirm the size against the manufacturer's data sheet if you have any doubts. Feel free to ask us about other sizes in the same category or about oil seals with special features for your equipment.