Radial shaft seal DBH 8606Vit — 40.00 x 52.00 x 7.00

DBH 8606Vit is a radial shaft seal reference, within Seals. Request a quote for 8606Vit via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8606Vit radial shaft seal is a lip seal designed to block the passage of oil, grease or water in equipment with a rotating shaft. Its Lx-H-H design combines a sealing lip with a reinforced body, and it is press-fitted into the housing so that the lip bears on the shaft. It is used in gearboxes, pumps, electric motors and power transmission equipment where lubricant must be contained and dust or moisture kept out.

This oil seal is identified by its designation 8606Vit and by the dimensions shown on the product page: shaft diameter of 40 mm, housing diameter of 52 mm and height of 7.00 mm. The Lx-H-H design corresponds to a lip seal with a metal body and sealing lip, suitable for lubricated rotating shafts. Before installing it, check that these three dimensions match the housing and shaft of your equipment: they define the fit and the correct seating of the lip.

Typical applications for an oil seal of these dimensions are found in gearboxes, centrifugal pumps, electric motors, rollers and power transmission equipment. In all these cases it performs the same function: retaining the lubricant inside the assembly and preventing particles, water or steam from entering from the outside. It is also used as a barrier in equipment with oil splash or frequent washing, provided the shaft and housing are in good condition.

When selecting it, in addition to the dimensions, take into account the shaft speed, the operating temperature and the type of fluid to be retained. The lip must be lubricated and bear on a track free of grooves and burrs; if the shaft is worn, it is advisable to evaluate an oil seal with an offset lip or a repair sleeve. During installation, lubricate the lip, insert it perpendicular to the shaft and avoid striking it unevenly so as not to damage the metal body.

If you cannot find the exact part number or need a nearby size, send us the designation 8606Vit or the three dimensions (shaft, housing and height) by WhatsApp. At MR Accesorios Industriales we can look for an equivalent within the same radial shaft seal category and quote it against the manufacturer's data sheet. The more data you give us about the equipment and the fluid, the more accurate the proposal will be.

MR Accesorios Industriales carries the DBH brand within its line of seals and oil seals. If you want a quote for this oil seal or to ask about another size, write to us on WhatsApp with the part number 8606Vit and we will reply with the technical and commercial information.