DBH 8461/85 radial shaft seal — 24 x 41 x 8.5
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
DBH 8461/85 is a reference of radial shaft seal, within Seals. Request a quote for 8461/85 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The DBH 8461/85 radial shaft seal is a lip seal that closes off the passage of oil or grease between a rotating shaft and its housing. With 24 mm shaft, 41 mm housing and 8.50 mm height, and Lx design, it is installed in gearboxes, pumps, electric motors and transmission equipment. MR Accesorios Industriales supplies this brand and advises you on choosing the right seal for the application.
This item is a radial shaft seal from the DBH line, identified as 8461/85. Its dimensions are 24 mm shaft diameter (d), 41 mm housing diameter (D) and 8.50 mm height (h). The Lx design corresponds to a seal with a sealing lip and metal body, designed to retain lubricant and exclude contaminants on rotating shafts. Always verify that these three dimensions match the housing and shaft before replacing.
Typical applications for a seal of this size include gearboxes, centrifugal pumps, electric motors, reducers and power transmission equipment. In all cases it works on a shaft rotating inside a fixed housing, with the lip resting on the shaft surface. It is a wear part: it should be checked when leaks or noises appear in the sealing area.
For installation, clean the housing and shaft, check that there are no burrs or marks that could damage the lip, and lubricate the seal before inserting it. The selection depends on shaft speed, working temperature and the type of lubricant. If the shaft shows wear, consider a seal with an auxiliary lip. Do not strike the lip during installation.
If you need an equivalent, send us the code 8461/85 or the dimensions 24 x 41 x 8.50 by WhatsApp. You can also ask about other combinations in the same family. At MR Accesorios Industriales we help you find the option that best suits your equipment, with the DBH brand we supply.
Write to us on WhatsApp with the seal code or the dimensions of your shaft and housing, and we will send you the quote.
Dimensions
- Shaft (d)
- 24mm
- Housing bore (D)
- 41mm
- Height (h)
- 8.50mm
- Design
- Lx
Frequently Asked Questions
- What are the dimensions of the DBH 8461/85 oil seal?
- The DBH 8461/85 oil seal has a 24 mm shaft diameter, a 41 mm housing diameter and an 8.50 mm height. These three dimensions define the installation and must match your equipment. If you have doubts, send us the dimensions by WhatsApp and we will confirm.
- What applications is this oil seal suitable for?
- It is used in gearboxes, pumps, electric motors and transmission equipment where there is a rotating shaft that needs to retain lubricant and exclude dust or water. It is a wear part that should be replaced when leaks or noises appear.
- How do I request a quote or an equivalent?
- Write to us on WhatsApp with the code 8461/85 or the dimensions 24 x 41 x 8.50. If you need an equivalent, tell us the application and we will advise you. MR supplies the DBH brand and other alternatives.