Radial shaft seal DBH 8460 — 48.00 x 82.00 x 12.00

DBH 8460 is a radial shaft seal reference, within Seals. Request a quote for 8460 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8460 radial shaft seal is a lip seal that mounts on the shaft and inside the housing to retain lubricant and block the entry of dust, water or particles. Its dimensions are 48 mm shaft, 82 mm housing and 12 mm height, with Mx-R design. It is used in gearboxes, pumps, electric motors and power transmission equipment operating with rotating shafts. MR Accesorios Industriales sells it as an official brand.

This item is a DBH 8460 radial shaft seal, identified by its numeric designation. It corresponds to a 48 mm shaft, an 82 mm housing and a height of 12.00 mm. The Mx-R design indicates a configuration with a sealing lip and a reinforced body for continuous service. The 8460 nomenclature follows the DBH designation system and should not be confused with inch dimensions or with other codes in the same family.

Radial shaft seals of this size are used in equipment with rotating shafts where oil or grease must be contained and external contamination kept out. They appear in gearboxes, centrifugal pumps, electric motors, conveyor rollers and machine tools. They are also found in agricultural and industrial applications where the environment has dust or moisture. The combination of 48 mm shaft and 82 mm housing is common in medium-sized power transmission equipment.

To install a seal, check that the shaft has no burrs, that the housing is clean and that the sealing surface has adequate roughness. Lubricate the lip before inserting it and press it in with a tube of a diameter similar to the seal's outer diameter, never striking the lip. The 12.00 mm height must match the housing depth. If the shaft is worn, consider a repair sleeve or a nearby size before forcing the seal.

If you need a seal equivalent to the DBH 8460, the most practical approach is to send the code and dimensions to MR Accesorios Industriales' WhatsApp. With the shaft, housing and height, an alternative from another brand or a nearby size within the same family can be found. It is also advisable to indicate the type of lubricant, the working temperature and the shaft speed to guide the selection. The more data you provide, the more accurate the proposal will be.

MR Accesorios Industriales sells this DBH seal as an official brand within its line of seals and oil seals. If the 8460 is not the size you are looking for, send the code or dimensions via WhatsApp and the technical team will review the available options. The quote is prepared according to the quantity and intended use, with no obligation.