DBH 8276Sil radial shaft seal — 76 x 98.5 x 10

DBH 8276Sil is a reference of radial shaft seal, within Seals. Request a quote for 8276Sil via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 8276Sil radial oil seal is a lip seal fitted in cylindrical housings to retain lubricant and block the ingress of dust, water or particles. Its Lx-R design combines a sealing lip with a dust lip, making it suitable for equipment exposed to moderate contamination. With dimensions of 76 mm shaft, 98.50 mm housing and 10 mm height, it is a common replacement part in gearboxes, pumps and industrial transmissions.

This item is an oil seal from the DBH line, identified by code 8276Sil. Its nominal dimensions are 76 mm shaft diameter, 98.50 mm housing diameter and 10.00 mm height. The Lx-R design indicates a configuration with a sealing lip and an auxiliary exclusion lip, intended to retain oil or grease on one side and stop dirt ingress from the other.

Typical applications for an oil seal of this size include gearboxes, electric motors, centrifugal pumps, conveyor rollers and power transmission equipment. In all cases it performs the same function: keeping lubricant inside the housing and preventing external agents from reaching the bearing or shaft. It is a wear part, so its periodic replacement is part of the preventive maintenance of any rotating equipment.

To select the correct oil seal, check that the shaft diameter, housing diameter and height match those of the machined housing. Also check the condition of the shaft surface: wear or a deep mark in the lip contact area causes leaks even if the seal is new. During installation, lubricate the lip with the same oil or grease used in the equipment, insert the seal perpendicular to the shaft and avoid striking it unevenly to prevent damaging the spring or deforming the casing.

If you need an equivalent from another brand, the most practical approach is to send us the full seal code, the shaft, housing and height dimensions, and a photo of the old part if you have it at hand. With that data we can look for an alternative within the DBH line or among the other brands MR sells. If the Lx-R design is not the one for your equipment, we can also guide you toward another lip configuration.

To request a quote for the DBH 8276Sil oil seal, send us the code on WhatsApp at MR Accesorios Industriales. At MR Accesorios Industriales we work with seals, bearings and power transmission for industrial replacement and maintenance. Write to us with the code or dimensions and we will reply with the appropriate reference.