Radial shaft seal DBH 8245 — 13.00 x 27.00 x 5.00

DBH 8245 is a radial shaft seal reference, within Seals. Request a quote for 8245 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8245 radial shaft seal is a lip seal that blocks the passage of oil, grease or water between a rotating shaft and its housing. With a 13 mm shaft diameter, 27 mm housing diameter and 5 mm height, it is used in gearboxes, pumps, electric motors and power transmission equipment to retain lubricant and keep dust out. It is a wear part: when leakage appears or the lip hardens, it is replaced. MR Accesorios Industriales supplies it as an official brand.

This item is a seal of Lt design, with the dimensions shown on its product page: shaft diameter 13 mm, housing diameter 27 mm and height 5.00 mm. The sealing lip runs on the shaft and the outer diameter is press-fitted into the bore. The Lt design corresponds to a single-lip configuration with a spring, suitable for rotating shafts with lubrication. Before mounting, check that the shaft has no burrs or marks that could cut the lip.

Typical applications for a seal of this size are small gearboxes, water and oil pumps, low-power electric motors, gear reducers and power transmission equipment. It also appears in machine tools and process equipment where a lubricated compartment must be separated from another with dust or moisture. In every case it performs the same function: keeping lubricant in and contaminants out.

To select the correct seal, the first step is to confirm the shaft diameter, the housing diameter and the height. Then check the condition of the shaft surface: if it is worn or has a marked groove, the new lip will not seal properly and you should consider a repair sleeve or a seal with an offset lip. During mounting, lubricate the lip, align the part without striking it and use a tube or socket of the right diameter to seat it evenly in the housing.

If you need a nearby size or an equivalent from another brand, send us part number 8245 and the shaft, housing and height dimensions. With that data we look for alternatives within the DBH seal line or from other brands we carry. We can also advise you if the Lt design is not the most suitable for your application and a different lip type or material is needed.

To request a quote for the DBH 8245 seal, send the part number by WhatsApp to MR Accesorios Industriales along with the quantity you need. If you have doubts about the size or design, attach a photo of the old part or the dimensions taken with a caliper. That way we quickly confirm that the seal matches your equipment before preparing the quote.