Radial shaft seal DBH 8130Vit — 35.00 x 50.00 x 8.00

DBH 8130Vit is a radial shaft seal reference, within Seals. Request a quote for 8130Vit via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8130Vit oil seal is a radial seal with 35 mm shaft diameter, 50 mm housing bore and 8 mm height, in Lx-R design. It is used to retain lubricant and exclude contaminants on rotating shafts, in gearboxes, pumps, electric motors and transmission equipment. Its elastomer lip runs on the shaft and its metal case fits into the housing. MR Accesorios Industriales supplies this brand and advises you so you choose the right seal for your application.

This item is a DBH radial shaft seal, identified with the designation 8130Vit. Its dimensions are 35.00 mm shaft diameter (d), 50.00 mm housing bore (D) and 8.00 mm height (h). The Lx-R design indicates a configuration with a retaining lip and dust lip, intended for service with lubricant and moderate exposure to dust or dirt. The outer case is metal and the sealing lip is elastomer, suitable for rotating shafts at moderate peripheral speeds.

Typical applications for this oil seal include gearboxes, gear reducers, centrifugal pumps, electric motors, compressors and power transmission equipment. In all cases, the seal performs two functions: preventing the leakage of oil or grease from inside and blocking the ingress of dust, water or particles that accelerate wear on bearings and gears. It is a wear part that should be replaced when leaks appear or when the equipment is disassembled for another repair.

To correctly install a seal such as the 8130Vit, check that the shaft has no burrs or deep marks in the contact area, and that the housing is clean and free of deformation. Lubricate the lip with the same grease or oil used in the equipment before inserting it, and use a tube or press that presses on the outer face, never on the lip. The 8 mm height should sit flush or slightly recessed depending on the housing design. If the shaft shows wear, consider a nearby size or a seal with the lip in another position.

If you need an equivalent or a close size, the most practical approach is to send us the full part number of the seal, a photo of the part and the dimensions taken with a caliper: shaft diameter, housing bore and height. With that data we can look for alternatives in the same brand or in others we supply, always respecting the housing tolerances. We can also advise you if the original seal has a special design, such as a double lip or dust lip, so that the replacement is reliable.

MR Accesorios Industriales supplies the DBH brand. If you want to request a quote for the 8130Vit oil seal or ask about a similar size, send us the part number by WhatsApp and we will reply with the technical information for your order. We also handle inquiries for seals from other series and for special seals for industrial equipment.