DBH 8130Pol radial shaft seal — 35 x 50 x 8
- Brand
- DBH
- Category
- Seals
- Subcategory
- Radial shaft seals
- Seal material
- polyacrylate
We respond promptly.
Since 1945 · Martínez, Buenos Aires, Argentina
Request your quote via WhatsApp or email, with the quantity you need.
Can't find the exact model? Write to us with the part number or model you're looking for: we'll find it and quote it, even if it's not listed in the catalog.
Description
DBH 8130Pol is a reference of radial shaft seal, within Seals. Request a quote for 8130Pol via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.
The DBH 8130Pol radial shaft seal is a lip seal designed to prevent lubricant leaks and the ingress of contaminants on rotating shafts. Its dimensions of 35 mm shaft diameter, 50 mm housing diameter and 8 mm height make it suitable for gearboxes, pumps and medium-sized electric motors. MR Accesorios Industriales sells this brand and advises you so you choose the right seal for your application.
This item is a DBH 8130Pol radial shaft seal with Lx-R design. Its dimensions are 35 mm shaft diameter (d), 50 mm housing diameter (D) and 8.00 mm height (h). The Lx-R design indicates a single-lip configuration with spring, intended to retain lubricant in one direction and exclude dust and dirt from the opposite side. It is a common replacement part in equipment with rotating shafts that requires reliable, low-maintenance sealing.
It is used in applications with continuous rotation and the need to contain oil or grease: gearboxes, centrifugal pumps, electric motors, spindles and bearings. It also appears in power transmission equipment and in agricultural or industrial machinery. Its size of 35x50x8 mm is common on medium-diameter shafts, so it is often found in gear reducers and general-purpose pumps.
To install it, check that the shaft and housing are clean, free of burrs and scratches. Lubricate the lip before inserting it and use an installation tube that presses on the outer diameter, never on the lip. Selection depends on speed, temperature and fluid type; if you have doubts, consult us with your equipment data. A poorly installed seal or one with incorrect dimensions causes premature leaks.
If you need an equivalent, send us the complete code of the original seal, the shaft, housing and height dimensions, and a photo of the part. With that data we look for alternatives in other brands or series that perform the same function. We can also advise you if the mounting space accepts height or design variants.
To request a quote for the DBH 8130Pol seal, send the code 8130Pol via WhatsApp to MR Accesorios Industriales. If you have the parts breakdown or the equipment data sheet, even better: that way we confirm that the size and design are correct. We handle technical inquiries and distribution orders throughout the country.
Dimensions
- Shaft (d)
- 35mm
- Housing bore (D)
- 50mm
- Height (h)
- 8.00mm
- Design
- Lx-R
Frequently Asked Questions
- What are the dimensions of the DBH 8130Pol seal?
- The DBH 8130Pol seal has 35 mm shaft diameter, 50 mm housing diameter and 8.00 mm height. These dimensions correspond to the standard designation and are those listed in the manufacturer's data sheet. It is always advisable to verify against the actual housing before installing.
- What type of applications is this seal suitable for?
- It is used on rotating shafts of gearboxes, pumps, electric motors and transmission equipment. Its function is to retain lubricant and prevent the ingress of contaminants. It is suitable for applications with moderate speeds and temperatures within the usual range of standard elastomers.
- How do I request a quote or an equivalent?
- Write to us via WhatsApp with the code 8130Pol or the dimensions 35x50x8 mm. If you are looking for an equivalent, also send us the original code and a photo. At MR Accesorios Industriales we reply with matching options and arrange the quote.