Radial shaft seal DBH 8106Vit — 45.00 x 60.00 x 7.00

DBH 8106Vit is a radial shaft seal reference, within Seals. Request a quote for 8106Vit via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8106Vit radial shaft seal is a lip seal that closes off the passage of lubricant and blocks the entry of dust and moisture on rotating shafts. Due to its dimensions of 45 mm shaft, 60 mm housing and 7 mm height, it is mounted in gearboxes, pumps and medium-sized motors. MR Accesorios Industriales carries this brand and will quote it on WhatsApp with the exact code.

The DBH 8106Vit is a seal with an Lz design and the following dimensions: shaft diameter 45 mm, housing diameter 60 mm and height 7.00 mm. The sealing lip works on the shaft and the outer casing is press-fitted into the housing. The Lz design corresponds to a seal with a single sealing lip and spring, suitable for rotating shafts with lubrication. The series nomenclature identifies the combination of dimensions and the construction type.

It is used in applications where oil or grease must be retained and the entry of contaminants prevented: gear cases, centrifugal pumps, electric motors, rollers and transmission equipment. It also appears in agricultural machinery, conveyors and process equipment. Whenever there is a shaft rotating inside a housing and two environments need to be separated, a seal like this performs the function.

To select it, check that the shaft, housing and height dimensions match the housing and shaft of your equipment. The Lz design defines the type of lip and its orientation. During installation, lubricate the lip before inserting it, avoid hitting it and make sure the shaft has no burrs or wear that could damage the seal. If the shaft shows a marked track, consider a seal with the lip in a different position or replacing the shaft.

If you cannot find the code 8106Vit or you need a nearby size, send us the dimensions of your seal (shaft diameter, housing and height) or a photo of the part. With that data we look for the equivalent in the same brand or in another one we carry. We can also guide you if the Lz design is not suitable for your application and a different type of lip or material is needed.

To request a quote for the DBH 8106Vit oil seal, write to us on WhatsApp and send us the code 8106Vit or the dimensions 45 x 60 x 7 mm. We will confirm alternatives. MR Accesorios Industriales carries this brand and can advise you on selecting the correct seal for your equipment.