DBH 8106 radial shaft seal — 45 x 60 x 7

DBH 8106 is a reference of radial shaft seal, within Seals. Request a quote for 8106 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 8106 radial shaft seal is a lip seal mounted between a rotating shaft and a fixed housing to retain lubricant and block the entry of dust, water or particles. Its dimensions — 45 mm shaft, 60 mm housing and 7 mm height — place it in medium-sized equipment such as pumps, gearboxes, electric motors and transmission cases. It is a wear part: when the lip hardens or becomes marked, it starts to lose oil and should be replaced before it damages the bearing.

This item is a seal from the DBH line, identified with the code 8106. Its attributes are specific: shaft diameter 45 mm, housing diameter 60 mm and height 7.00 mm. The Lz design corresponds to a seal with a sealing lip and a profile that combines the outer body with a single lip section, suitable for rotating shafts with lubrication. The 8106 nomenclature is the manufacturer's designation for this size, and the MPN part number matches it.

Typical applications for a seal of this size appear in centrifugal pumps, speed reducers, electric motors, compressors and belt or chain drive equipment. In all cases it performs the same function: confining the oil or grease inside the assembly and preventing contaminants from entering from the outside. It is also used on fan, mixer and conveyor shafts, where the environment usually has dust or moisture.

To install it properly, check that the shaft has no burrs or wear and that the surface where the lip seats is polished. Lubricate the lip with the same grease or oil as the equipment before inserting it, and apply force on the outer ring, never on the lip. If the housing has a shoulder or a chamfer, respect the mounting depth so that the seal sits flush or slightly recessed. Poor alignment shortens the service life of the seal.

To quote the code 8106, the most practical thing is to send it to us together with the shaft, housing and height dimensions shown on the plate or drawing. With that data we can look for an alternative within the same DBH line or from another brand we carry. It also helps if you tell us the type of equipment and the fluid to be retained, because that helps define the lip material and the spring type.

At MR Accesorios Industriales we work with DBH seals as part of our seals and oil seals line. If you want a quote for the 8106, write to us on WhatsApp with the code and the dimensions. We will reply with the alternative and replacement options.