Radial shaft seal DBH 8055Pol — 32.00 x 48.00 x 7.00

DBH 8055Pol is a radial shaft seal reference, within Seals. Request a quote for 8055Pol via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 8055Pol radial shaft seal is a lip seal mounted between a rotating shaft and a stationary housing to retain lubricant and block the entry of dust, water or particles. Its dimensions of 32 mm shaft, 48 mm housing and 7 mm height place it in medium-sized equipment such as pumps, electric motors, gearboxes and transmission cases. MR Accesorios Industriales supplies this official brand and advises you on choosing the right seal for your application.

This item is a DBH 8055Pol radial shaft seal with 32.00 mm shaft diameter, 48.00 mm housing diameter and 7.00 mm height. Its Lx-R design combines a sealing lip and a spring that maintains contact pressure on the shaft. The flexible rubber lip rests on the machined surface of the shaft, while the outer body fits into the housing to prevent oil or grease from escaping outward and contaminants from entering inward.

It is used in rotating equipment where bearings and gears must be protected: centrifugal pumps, electric motors, gear reducers, transmission cases, mixers, compressors and machine tools. It also appears in agricultural and industrial applications where the shaft rotates at moderate speeds and dust or moisture is present. In all cases, the seal works alongside a bearing or bushing that needs clean lubricant to last.

To install it, check that the shaft has no burrs or marks and that the housing is clean and free of deformation. Lubricate the lip with the same grease or oil used in the equipment before inserting it, and press the seal in perpendicular to the shaft so as not to damage the lip. If the shaft shows wear, consider a neighboring size or a seal with the lip in a different position. Selection depends on speed, temperature and the type of fluid to be retained.

If you need an equivalent or a different size, send us the code engraved on the old seal, the shaft, housing and height dimensions, and a photo of the part. With that data we look for alternatives within the DBH line or from other brands we carry. We can also advise you on the lip material and spring type according to the fluid and working temperature.

To request a quote for the DBH 8055Pol seal or ask about a similar size, send the code by WhatsApp to MR Accesorios Industriales. We will reply with the quote and the alternatives that best suit your equipment. More than 80 years supporting Argentine industry with power transmission and sealing components.