DBH 8043 radial shaft seal — 32 x 52 x 11

DBH 8043 is a reference of radial shaft seal, within Seals. Request a quote for 8043 via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 8043 oil seal is a radial shaft seal with a 32.00 mm shaft, 52.00 mm housing and 11.00 mm height, in Lx design. It is used to retain lubricant and exclude contaminants in rotating equipment, where the shaft turns inside a fixed housing. It is a wear part: when oil leakage appears or dust gets in, it should be replaced with one of the same size and design. MR Accesorios Industriales sells this brand and helps you identify the correct size.

The DBH 8043 is a radial shaft seal with a sealing lip, identified by its designation 8043. Its dimensions are 32.00 mm shaft diameter, 52.00 mm housing diameter and 11.00 mm height, and its design is Lx. The lip runs on the rotating shaft and the body seats in the housing bore. The Lx design defines the geometry of the lip and the body, a key detail so the seal seats properly and seals in the intended direction.

This type of oil seal appears in gearboxes, pumps, electric motors, rollers and power transmission equipment. Its function is twofold: retain the oil or grease inside the assembly and prevent the entry of dust, water or particles. In environments with vibration or varying temperature, the lip must maintain contact without deforming. That is why it is selected based on the shaft, the housing and the working conditions, not only on the outer size.

To install it, check that the shaft has no burrs or wear on the sealing track and that the housing is clean and free of dents. Lubricate the lip before inserting it and place the seal perpendicular to the shaft, without twisting it. If the shaft has a marked groove, consider an alternative design. The final selection depends on speed, temperature and the fluid to be retained; with that data the right variant is confirmed.

If you need an equivalent, send us the part number 8043 or the dimensions 32.00 x 52.00 x 11.00 mm by WhatsApp. It also helps if you indicate the equipment, the brand of the original seal and a photo of the part. With that we review alternatives within the same radial shaft seal category and confirm which option fits. You do not need to have the part number at hand: the dimensions are enough to guide the search.

MR Accesorios Industriales sells the DBH brand. If this oil seal is for equipment in operation, write to us by WhatsApp and send us the part number 8043 or the dimensions. We reply with the corresponding reference and arrange the quote.