Radial shaft seal DBH 6869Vit — 90.00 x 110.00 x 15.00

DBH 6869Vit is a radial shaft seal reference, within Seals. Request a quote for 6869Vit via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 6869Vit radial shaft seal is a lip seal designed to retain lubricant and exclude contaminants on rotating shafts. Its dimensions of 90 mm shaft diameter, 110 mm housing diameter and 15 mm height make it suitable for equipment with medium-section shafts. Design Lx-R combines a retaining lip with a dust lip, offering double protection in dusty or dirty environments. It is a common replacement part in pumps, gearboxes and transmissions operating under demanding conditions.

This item is a radial shaft seal from the DBH brand, identified by code 6869Vit. Its standardized dimensions are: shaft diameter (d) 90 mm, housing diameter (D) 110 mm and height (h) 15.00 mm. Design Lx-R indicates that the seal has a main retaining lip and a secondary exclusion lip, which improves performance against external particles. The lip elastomer and the internal spring ensure uniform contact on the shaft. It is a precision part that must be mounted in housings with the proper finish.

Typical applications for this oil seal include centrifugal pumps, gearboxes, electric motors, transmission shafts and continuous-process equipment. In all these cases, the oil seal prevents oil or grease leaks and protects the internal bearings from the entry of dust, water or chips. Its size of 90 x 110 x 15 mm is common in medium-power equipment, where a reliable barrier is required between the lubricant and the environment. It is also used in agricultural and industrial machinery operating under severe conditions.

To correctly select this oil seal, check that the shaft and housing dimensions match those indicated: 90 mm and 110 mm respectively. The 15 mm height must be compatible with the housing depth. Design Lx-R is suitable when there is exposure to contaminants; if the environment is clean, a single-lip design may be sufficient. During installation, lubricate the lip with the same oil used in the equipment, avoid impacts and make sure the shaft has no burrs or marks that could damage the seal. Shaft runout and surface finish are critical factors for service life.

If you need an equivalent oil seal or a neighboring size, you can contact us with code 6869Vit or with the dimensions 90 x 110 x 15 mm. At MR Accesorios Industriales we have alternatives from other brands and can guide you according to the application. We can also advise you on the most suitable lip design (single, double, with dust lip) and the elastomer material (NBR, FKM, etc.) according to the temperature and the fluid to be retained. We quote quickly through WhatsApp.

To order this oil seal or ask about a similar size, send code 6869Vit on WhatsApp to MR Accesorios Industriales. We reply with the purchasing options. You can also ask about other seals and oil seals in our catalogue. We are here to advise you on selection and installation.