Radial shaft seal DBH 6867 — 59.00 x 76.00 x 9.00

DBH 6867 is a radial shaft seal reference, within Seals. Request a quote for 6867 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 6867 radial shaft seal is a lip seal designed to retain lubricant and exclude contaminants on rotating shafts. Its dimensions of 59 mm shaft diameter, 76 mm housing and 9 mm height make it suitable for equipment where axial space is limited. The Mt design indicates a configuration with a main lip and a dust lip, which improves protection in dusty or dirty environments. MR Accesorios Industriales supplies this official brand for general industrial applications.

The DBH 6867 is a radial shaft seal with the following standard dimensions: shaft diameter 59 mm, housing diameter 76 mm and height 9.00 mm. The Mt design corresponds to a seal with a main sealing lip and a secondary exclusion lip, mounted on a metal case that fits by interference in the housing. This configuration is common in equipment where oil or grease must be contained while also preventing the ingress of external particles.

Typical applications for this seal include gear reducer boxes, centrifugal pumps, electric motors, transmission shafts and continuous process equipment. Due to its shaft-to-housing ratio, it is found in assemblies where the shaft rotates at moderate speeds and the service temperature does not exceed the limits of the standard elastomer. It is a wear part that should be replaced when leaks appear or stiffness is detected in the lip.

To select a seal such as the 6867 correctly, verify that the shaft diameter is within the recommended tolerance and that the contact surface has an appropriate roughness, without grooves or wear. The housing must be clean, free of burrs and with the exact diameter to ensure the fit. During installation, lubricate the lip with the same oil or grease used in the equipment and avoid striking it or installing it in the wrong position. Poor installation is the most common cause of premature failure.

If you need a nearby size or an equivalent from another brand, you can consult us with code 6867 or with the dimensions 59 x 76 x 9 mm. We can also help if the Mt design does not suit your application and you require another type of lip or material. At MR Accesorios Industriales we have more than 80 years of experience in seals and radial shaft seals, and we advise you so you choose the right option for your equipment.

To request a quote for the DBH 6867 radial shaft seal, write to us on WhatsApp and mention code 6867 or the dimensions 59 x 76 x 9 mm. We reply with the alternatives that best suit your needs.