Radial shaft seal DBH 6816

DBH 6816 is a radial shaft seal reference, within Seals. Request a quote for 6816 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 6816 radial shaft seal is a lip seal designed to retain lubricant and exclude contaminants in equipment with a rotating shaft. It is mounted in housings that accept a height of 9.80 mm and a shaft diameter of 95.2 mm. It is a wear part that should be replaced when oil loss or dirt ingress appears. MR Accesorios Industriales carries this brand and advises you on choosing the correct seal for your application.

This item is a radial shaft seal from the DBH line, identified with the code 6816. According to the product page data, it runs on a shaft of 95.2 mm diameter and has a height of 9.80 mm. The A 080 design corresponds to a single-lip configuration with a spring, suitable for lubricated rotating shafts.

Typical applications for a seal of this size include gearboxes, centrifugal pumps, electric motors, rollers and transmission equipment. In all cases it performs two functions: retaining the oil or grease inside the assembly and preventing dust, water or particles from entering. It is commonly found in equipment where the shaft rotates at moderate speeds and the operating temperature does not exceed the limits of the elastomer. If your equipment operates with high vibration or exposure to chemicals, it is advisable to evaluate a different compound.

To install a seal, the condition of the shaft must be verified: free of burrs, free of wear marks and with the appropriate roughness. The lip is lubricated before inserting it and rests perpendicular to the shaft. Selection depends on the shaft diameter, the housing height, the type of lubricant and the rotation speed. If the shaft is scored, the new seal may leak quickly. In those cases, it is recommended to evaluate a wear sleeve or replace the shaft. MR Accesorios Industriales can guide you if you do not have the equipment data sheet.

If you need an equivalent or a nearby size, send the code 6816 together with the shaft diameter and the height you measured. A photo of the old seal showing the markings also helps. With that data, an alternative is sought within the same brand or another compatible line. If the housing has a different depth, a seal of a different height can be evaluated. The more complete the information, the faster the response.

To request a quote for the DBH 6816 oil seal or ask about a similar size, write to us on WhatsApp. MR Accesorios Industriales works with industrial brands and manufactures housings, chains and pulleys. With more than 80 years in the industry, we can help you identify the correct part and avoid wrong purchases. Send the code, the dimensions and the type of equipment; we will reply with the option that best suits your needs.