DBH 6774Sil radial shaft seal — 41.2 x 49.28 x 6.2

DBH 6774Sil is a reference of radial shaft seal, within Seals. Request a quote for 6774Sil via WhatsApp or email with the quantity you need; we respond promptly with the quote and equivalents.

The DBH 6774Sil radial shaft seal is a lip seal mounted on the shaft to retain lubricant and block the entry of dust, water or particles. Due to its dimensions of 41.20 mm shaft, 49.28 mm housing and 6.20 mm height, it is used in gearboxes, pumps, electric motors and power transmission equipment where axial space is limited. It is a brand MR sells, with the seal quality that a plant shutdown demands.

This item is a radial shaft seal from the DBH line, identified by code 6774Sil. Its dimensions are 41.20 mm shaft diameter, 49.28 mm housing diameter and 6.20 mm height. The LMx design corresponds to a single lip with spring, intended for rotating shafts with permanent lubrication. The lip elastomer runs on a ground surface and the outer metal case ensures a firm fit in the housing. It is a direct replacement part, not a generic component.

Typical applications of this seal include gearboxes, centrifugal pumps, electric motors, conveyor rollers and belt or chain transmission equipment. In all cases it fulfills the function of confining the oil or grease inside the assembly and preventing contaminants from entering from the outside. Due to its reduced height, it is common in spaces where there is no room for wider seals. It is also used as a secondary closure in split plummer block housings and hubs.

To install it correctly, verify that the shaft diameter is within the recommended tolerance and that the contact surface has no burrs or marks. Lubricate the lip with the same grease or oil as the equipment before inserting it, and do so with a support tube that rests on the case, never on the lip. If the housing has a shoulder, respect the depth so that the seal is not deformed. Poor alignment shortens the service life of the seal.

If you need an equivalent, send us code 6774Sil along with the shaft, housing and height dimensions. You can also send us a photo of the old seal or the housing drawing. At MR Accesorios Industriales we cross-check the designation with the corresponding options in the DBH line and in other brands we sell. That way we give you a compatible option without you having to guess.

To request a quote for this seal or ask about another size, write to us on WhatsApp and mention code 6774Sil. We will reply with the alternatives that best fit your equipment. At MR Accesorios Industriales we work with seals and oil seals for industrial maintenance, and we can advise you if you are unsure between two sizes. Don't let a leak go: a seal in poor condition ends up damaging bearings and shafts.