Radial shaft seal DBH 6118Pol — 76.20 x 95.25 x 9.27

DBH 6118Pol is a radial shaft seal reference, within Seals. Request a quote for 6118Pol via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 6118Pol radial shaft seal is a lip seal mounted between a rotating shaft and a fixed housing to retain lubricant and block the entry of dust, water or particles. Its Lx-R design combines a sealing lip with a spring that maintains contact pressure on the shaft. It is used in gearboxes, pumps, electric motors and transmission equipment, where sealing extends the life of bearings and gears.

This item is a seal from the DBH brand, identified with the code 6118Pol. Its dimensions are 76.2 mm shaft, 95.25 mm housing and 9.27 mm height. The Lx-R design corresponds to a seal with a sealing lip and spring, designed for rotating shafts with lubrication. The elastomeric lip runs on the shaft track and the steel spring guarantees uniform pressure throughout its service life. The outer case is metallic, which facilitates press fitting into the housing.

Typical applications for this seal include gearboxes, speed reducers, centrifugal pumps, electric motors and belt or chain transmission equipment. In all these cases, the seal prevents oil leaks and the entry of contaminants that accelerate wear on bearings and gears. It is also used in agricultural machinery, earthmoving equipment and process lines where lubricant cleanliness is critical to equipment operation.

To correctly select a seal, you must verify the shaft and housing dimensions, the type of lubricant, the working temperature and the peripheral speed. Installation must be done with a clean, burr-free shaft, lubricating the lip before inserting it. The 9.27 mm height determines the housing depth. If the shaft shows wear, it is advisable to consider a seal with an offset lip or a repair sleeve. MR Accesorios Industriales carries this brand and can advise you on the selection.

If you need an equivalent seal or a nearby size, send us the code 6118Pol or the dimensions of your shaft and housing on WhatsApp. You can also indicate the manufacturer and model of the equipment so we can look up the cross reference. We work with in-house manufacturing in other lines, and we reply with concrete alternatives so you can request a quote without delays.