Radial shaft seal DBH 6116Sil — 31.75 x 44.56 x 6.35

DBH 6116Sil is a radial shaft seal reference, within Seals. Request a quote for 6116Sil via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 6116Sil radial shaft seal is a lip seal that mounts on the shaft and seals against the housing to retain lubricant and block the entry of dust, water or particles. Its Lx design combines a sealing lip with a metal case that press-fits into the cavity. It is used in gearboxes, pumps, electric motors and transmission equipment where there is continuous rotation and a need to keep the lubricant clean.

This item is a DBH 6116Sil radial shaft seal with dimensions of 31.75 mm shaft diameter, 44.56 mm housing diameter and 6.35 mm height. The Lx design corresponds to a single-lip seal with a metal case and sealing lip, intended for rotating shafts with lubrication. The 6116Sil designation identifies the size and type within the DBH line. These values are those listed in the manufacturer's data sheet and were confirmed for this code.

Typical applications for a seal of these dimensions appear in equipment with transmission shafts: gearboxes, centrifugal pumps, electric motors, compressors and machine tools. It is also used in gearboxes and bearings where oil or grease leaks must be prevented and the interior protected from contaminants. It is a wear part that should be checked when leaks or noises appear at the shaft.

To install it, check that the shaft and housing are clean and free of burrs, lubricate the lip before inserting it and place the seal perpendicular to the shaft, without striking it unevenly. The selection depends on rotation speed, working temperature and the type of lubricant. If the shaft shows wear, consider a nearby size or a seal with an additional lip. It is always advisable to compare the actual dimension against the data sheet before replacing.

If you need an equivalent or a close size, send us the code 6116Sil or the shaft, housing and height dimensions by WhatsApp. At MR Accesorios Industriales we can look for alternatives within the DBH line or other brands we carry, always respecting the dimensions and the type of design. We can also advise you if the original seal is not available and a solution has to be adapted.

To request a quote for the DBH 6116Sil oil seal, write to us on WhatsApp with the code and the quantity you need. At MR Accesorios Industriales we work with official brands we carry and we reply with the available technical information. If you have doubts about the installation or the application, ask us and we will help you define the best option for your equipment.