Radial shaft seal DBH 6081 — 117.08 x 158.77 x 15.87

DBH 6081 is a radial shaft seal reference, within Seals. Request a quote for 6081 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 6081 radial shaft seal is a lip seal that closes off the passage of oil or grease between a rotating shaft and its housing, while at the same time preventing dust, water or particles from entering. It is installed in gearboxes, pumps, motors and transmission equipment where lubricant must be retained and bearings protected. It is a wear part: when leakage or contamination appears, it is replaced by size.

This DBH 6081 seal runs on a shaft with a diameter of 117.08 mm and fits into a bore of 158.77 mm, with a total height of 15.87 mm. The Lz design corresponds to a sealing lip with spring and an outer metal body, intended for housings that require a firm fit and good resistance to moderate internal pressure. It is a radial section seal, not axial: the lip rests on the shaft and the outer face seals against the housing.

Typical applications for this type of seal are gearboxes, speed reducers, centrifugal pumps, electric motors and power transmission equipment. In all those cases it performs the same function: retain the oil inside the assembly and keep environmental dirt out. It is also used in process equipment where the shaft rotates continuously and the operating temperature is moderate.

To select and install a radial shaft seal, take into account the shaft and housing dimensions, the type of lubricant, the rotation speed and the service temperature. The lip must be lubricated before assembly, the shaft must be free of burrs and marks, and the part is inserted perpendicular to the housing, without striking the lip. If the shaft shows wear, consider a nearby size or a repair sleeve.

If you need an equivalent or a size close to this DBH 6081, send us the part number engraved on the old part, the equipment brand and the shaft and housing dimensions. With that data we look for the available alternative in the seal and radial shaft seal line. We can also check whether the Lz design is suitable for your application or whether another lip profile is preferable.

MR Accesorios Industriales carries the DBH brand as an official brand within its seal and radial shaft seal line. Send part number 6081 via WhatsApp and we will quote you the seal or its equivalent, with technical advice so you install it without mistakes.