Radial shaft seal DBH 6026Pol — 80.00 x 100.00 x 10.00

DBH 6026Pol is a radial shaft seal reference, within Seals. Request a quote for 6026Pol via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 6026Pol oil seal is a radial shaft seal with an Mx-R design that is fitted into the housing and seals against the rotating shaft. Its function is to retain the lubricant inside the assembly and stop dust, water or particles from entering. With an 80 mm shaft, 100 mm housing and 10 mm height, it is a common size in power transmission equipment and pumps. At MR Accesorios Industriales we sell it as an official brand and advise you so you choose the right oil seal.

This item is a DBH radial shaft seal with the designation 6026Pol, with the following dimensions: shaft diameter 80 mm, housing diameter 100 mm and height 10 mm. The Mx-R design corresponds to a single sealing lip with a metal case and spring, intended for rotating shafts with lubrication. The code 6026Pol identifies the size and the construction type within the DBH line. It is a wear component: with use, the lip hardens or wears and begins to lose sealing performance.

Typical applications for an oil seal of this size include gearboxes, centrifugal pumps, electric motors, rollers and power transmission equipment. In all cases it works on a shaft that rotates inside a fixed housing, separating the oil or grease from the environment. It is also used in equipment where there is water or dust splash and the bearings need to be protected. If the equipment operates with a lot of vibration or temperature, it is advisable to review the selection of the lip material.

To install it, check that the shaft is clean, with no burrs or marks, and lubricate the lip before inserting it. The oil seal must enter perpendicular to the housing, without blows that deform the metal case. If the shaft shows wear in the contact area, consider a repair sleeve or an oil seal size with an offset lip. The selection depends on speed, temperature and the fluid to be retained; these data are confirmed against the manufacturer's data sheet before quoting.

If you need an equivalent or a nearby size, send us the code 6026Pol together with the shaft and housing dimensions. A photo of the old oil seal and of the area where it is fitted is also helpful. With that data we look for alternatives within the DBH line or from other brands we carry. Not all sizes are interchangeable: the lip design and the material can vary even if the outer dimensions match.

To request a quote for the DBH 6026Pol oil seal, write to us on WhatsApp and send us the code and the quantity. At MR Accesorios Industriales we reply with the quote and the alternatives if that exact size is not available. We can also advise you on installation and care so the oil seal lasts as expected. More than 80 years serving industry allow us to understand what each piece of equipment needs.