Radial shaft seal DBH 6024 — 84.00 x 100.00 x 13.00

DBH 6024 is a radial shaft seal reference, within Seals. Request a quote for 6024 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 6024 radial shaft seal is a lip seal that closes off the passage of oil or grease between a rotating shaft and its housing. With an 84 mm shaft diameter, 100 mm housing diameter and 13 mm height, and an Lx design, it is mounted in gearboxes, pumps, electric motors and power transmission equipment. Its function is to retain lubricant and stop the ingress of dust, water or particles that accelerate wear on bearings and gears.

This item is a DBH radial shaft seal, identified by part number 6024. Its dimensions are 84 mm shaft diameter (d), 100 mm housing diameter (D) and 13 mm height (h). The Lx design defines the geometry of the lip and the metal body: it is the variant used when the seal works with the lip facing the lubricant side. Before mounting it, check that these three dimensions match the shaft and the seat where it is housed, because a seal with different dimensions will not seal.

Typical applications for a seal of this size are in equipment with medium-section transmission shafts: gearboxes, reducers, centrifugal pumps, electric motors, mixers and conveyors. In all these cases the seal performs the same function: keeping the oil inside the assembly and preventing contaminants from entering. It is also used as a secondary barrier in bearings and bushings that work in dusty or humid environments.

To choose correctly, in addition to the dimensions, take into account the type of lubricant, the shaft rotation speed and the working temperature. The Lx design and the lip material must be compatible with the fluid and with the shaft surface. During mounting, lubricate the lip, check that the shaft has no burrs or marks and that the housing is clean and free of deformation. A poorly seated seal loses effectiveness within a few hours.

If part number 6024 is not the one you need, we can look for an equivalent or a nearby size within the DBH line. To do this, send us the original part number, the shaft, housing and height dimensions, and a photo or detail of the equipment where it is mounted via WhatsApp. With that data we check whether a compatible alternative exists and send you the quote.

At MR Accesorios Industriales we carry the DBH brand. If you want to confirm the application of this seal or request a nearby size, write to us on WhatsApp with part number 6024 and we will reply with the technical information and the corresponding quote.