Radial shaft seal DBH 6009 — 63.50 x 88.90 x 12.70

DBH 6009 is a radial shaft seal reference, within Seals. Request a quote for 6009 via WhatsApp or email with the quantity you need; we respond promptly with lead time and equivalents.

The DBH 6009 radial shaft seal is a lip seal that prevents oil or grease leaks and blocks dust and water ingress in equipment with a rotating shaft. It is press-fitted into the housing and runs on the shaft with an elastomeric lip that maintains dynamic contact. With its dimensions of 63.5 mm shaft, 88.9 mm housing and 12.70 mm height, it is a common replacement part in gearboxes, pumps and electric motors. MR Accesorios Industriales supplies it as an official brand.

This item is a seal from the DBH line, identified by code 6009. Its nominal dimensions are 63.5 mm shaft diameter, 88.9 mm housing diameter and 12.70 mm height. The Mz design corresponds to a configuration with a sealing lip and a metal body that fits into the housing. The lip elastomer is formulated to resist industrial oils and greases, and the internal spring maintains contact pressure on the shaft. It is a standard replacement part, not a special development.

Typical applications for a seal of these dimensions include gearboxes, speed reducers, centrifugal pumps, electric motors and transmission equipment. In all cases it serves to retain lubricant inside the assembly and prevent external contaminants from entering the bearings or gears. It is also used on fan, mixer and conveyor shafts, where the environment may contain dust or moisture. It is always advisable to verify that the seal is compatible with the fluid and operating temperature of the equipment.

To install a radial shaft seal, the housing must be clean, free of burrs and scratches, and the shaft must not show wear in the lip contact area. It is recommended to lubricate the lip with the same oil or grease used in the equipment before installation, and to use an installation tool that presses on the outer diameter without damaging the seal. The 12.70 mm height defines the required axial space. If the shaft has a worn track, a seal with the lip in a different position or a repair sleeve may be considered.

If you need an equivalent seal or a nearby size, the most practical approach is to send us code 6009 or the current shaft, housing and height dimensions. With that data we can look for an alternative within the same DBH line or from other brands we carry. We can also advise you if the Mz design is not suitable for your application and another lip geometry or material should be considered. The idea is that you don't have equipment down because of a sealing part.

To request a quote for the DBH 6009 seal, send the code by WhatsApp to MR Accesorios Industriales. If you have doubts about the size or design, attach a photo of the old part or the measurements taken with a caliper. That way we can quickly confirm the reference and send you the quote. We work with seals and oil seals for different industrial applications, and we can guide you on installation or selection if needed.